-
DSC Moray Swinging Ladder Dredge Package
Dredge Overview DSC Moray Total Dredge Package, 8-inch DSC Moray Swinging Ladder Dredger for sale. This dredge is a submerged-pump swinging ladder dredge system built in 2009. Common applications include maintenance of lakes, canals, retention ponds, environmental cleanups and restorations. General Information Never been in salt water Engine rebuilt at 6,500 hrs. Has all documentation…
-
Auger Type Float Dredge With Trailer
Dredge Overview Custom made, Mudcat type auger dredge, with cabin and trailer for sale. General Build Year: 1980’s Dredge Type: Auger Type Float Dredge Operating Hours: Unknown (current owner has put approximately 750 hours) Overall Condition: Good working order Maintenance: Maintenance done in house, no major repairs since purchase Specs 6-71 engine 8×8 pump Hydraulic…
-
8″ Horizontal Cutterhead Dredge
Dredge Overview For sale: 8″ Horizontal Cutterhead Dredge. This is a home built dredge that’s modeled after a Mud Cat. General Build Year: 1990 Dredge Type: Horizontal Cutter Suction 6-71 Detroit Diesel (unknown hours) Goulds Pump Dredge will require work before being placed into service Does not currently run Last worked 2 years ago Hull…
-
VMI 615 Dredge
Dredge Overview For sale: VMI 615 Dredge with less than 100 hours on machine after rebuild. Additionally this dredge comes with 800 +/- ft. of 8″ pipe (20′ sticks) with floats and an additional 15 pieces of 10′ of 8″ flexible tubing. Common dredging applications include pond, marina, and lake maintenance. Full hydraulic oil has…
-
Submerged Pump Swinging Ladder Dredge
Dredge Overview DSC Moray submerged pump swinging ladder dredge for sale. Details Manufacturer: DSC Year Built: 2007 Model: Moray Engine freshly rebuilt If bought at asking price will include $30k-$40k in spare parts Optional equipment Dredge Automation GPS Dredging System Production Instrumentation Swing winches for conventional operations Traveling spud carriage General Information Length Overall…
-
4″ Cutterhead Dredge
4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…
-
DSC Moray Class Dredge
Dredge Information The DSC Moray 8″ X 8″ Moray Class Dredge Is equipped with a Caterpillar diesel engine with inline direct marine-style transmission for dredge pump reduction. PLC operating system. Standard equipment, including power up/down winches for proper cable storage and a stern kicker spud or extending leg for controlled dredge positioning. Location: Florida Dimensions…
-
8-inch Submerged Pump Swinging Ladder Dredge
Dredge Overview DSC Moray Class 8-inch Submerged Pump Swinging Ladder Dredge available for sale. A 2022 survey has the dredge in good condition with good coatings. Vessel length: 42 ft. Vessel width: 11 ft. Dredging Depth: 17.5 ft. (5.3 m) Dredge Ladder: 20 ft. Discharge: 203.2 mm (8-inch) Power: 275 hp (205 kW) Cutter Power:…
-
2023 GeoForm Dino 6 Dredge
Dredge Overview 2023 GeoForm Dino 6 Dredge for sale in Canada. This dredge is used for cleaning sediment and sludge and from marinas, lagoons, and ponds. Year Built: 2023 Dredge Type: Horizontal Cutter Suction / Auger Characteristics Only 680 engine hrs Bought new in 2023 Dredge has no deficiencies and it’s ready to work Included…
-
LWT Pit Hog Electric Auger Dredge (BCV-4)
Dredge Details LWT Pit Hog Remote Controlled Electric Dredge was purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′…
-
LWT Pit Hog Electric Dredge (BCV-5)
Dredge Details This LWT Pit Hog Remote Controlled Dredge had been purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is…
-
Rotomite-6000 Self-propelled Dredge
Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 by SRS Crisafulli is self-propelled dredge that gives you unparalleled control and…
-
VMI MD-815 200 mm Horizontal Mini Dredge
Dredge Overview 2016 VMI MD-815 200 mm (8″) Horizontal Mini Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster…
-
IMS 5012 HP Versi-Dredge
Dredge Details & Overview Built in 2007, the IMS 5012 HP Versi-Dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal…
-
Rotomite 6000 Dredge
The Rotomite 6000 dredger is easily truck transported and can be used in a wide range of dredging operations from municipal and industrial applications to conservation projects. Quick Overview One owner dredge Articulating cutterhead to keep the cutting teeth at right angles to the face of the dredged material The hydraulic thruster on the Rotomite…
-
152.4 mm (6″) Horizontal Cutterhead Dredge
152.4 mm (6 inch) horizontal cutterhead dredge with John Deere 163 HP Turbo diesel engine. The dredge is fully operational in good working order. Dimensions & Info Length: 30 ft. Width: 10 ft. Great running condition with Joy stick paddle wheel propulsion Floatation in compartments. Will not sink 8 inch discharge HDPE pipe available also…
-
IHC Beaver 16-inch Cutter Suction Dredge (CSD)
Dredge Overview IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of…
-
10″ Horizontal Auger Dredge
Location: Canada Principal Characteristics New Hydraulic pump Rebuilt Engine 5.9 Cummins Rebuilt dredging pump 10″ Stainless Steal Ponton Our inventory changes weekly. If you don’t see what you’re looking for, please call us at +1 (225) 301-2873 or email us.
