Hydraulic Dredgers





Filters
Search

  • 1985 Mudcat by Ellicott Machine Corp dredge Model 815

    1985 Mudcat by Ellicott Machine Corp dredge Model 815

    • 40,000 USD
    • 240508-DH
    • Location: Ohio

    1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA

  • 1998 VMI 815 8″ Auger Dredge

    1998 VMI 815 8″ Auger Dredge

    • 95,000 USD
    • 240201-DH

    Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…

  • 6-inch Horizontal Cutter Dredger “Dino 6”

    6-inch Horizontal Cutter Dredger “Dino 6”

    • 94,500 USD
    • 230505-DH

    This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutterhead, boom, and cable system that was used on 1 small job after it was installed.…

  • 20 inch Ellicott Dredge 1870

    20 inch Ellicott Dredge 1870

    • 3,077,000 USD
    • 221108-DB

    Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…

  • 8-inch Swinging Ladder Dredge Ellicott 8010-HP

    8-inch Swinging Ladder Dredge Ellicott 8010-HP

    • 321,000 CAD
    • 230100-DL

    Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…

  • 12-inch Horizontal Cutter Dredger, IMS 5012

    12-inch Horizontal Cutter Dredger, IMS 5012

    • 370,000 USD
    • 230104-DH

    Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight…

  • 12-inch Horizontal Cutter Dredge IMS 7012

    12-inch Horizontal Cutter Dredge IMS 7012

    • 395,000 USD
    • 220809-DH

    IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…

  • 10-inch Horizontal Dredge, IMS 3010

    10-inch Horizontal Dredge, IMS 3010

    • 45,000 USD
    • 221002-DH

    This 10-inch Horizontal Dredge IMS 3010 was built in 1998. A new Cummins engine was installed in 2008. Estimated hours on the engine is 500. In 2013, a new cutterhead was installed. Pontoons are rusted and will need to be replaced. Location: State of Texas, USA           Principal Dimensions and Characteristics…

  • Crisafulli SD110

    Crisafulli SD110

    • 169,000 USD
    • 220902-DH

    2010 Crisafulli SD110 w/full cab, Yamaha 115 4 stroke engine and trailer. Also includes trailer full of pipe – approx 500-ft. The dredger is a lightweight (9,000 pounds), small (25 x 8.5 foot) self-propelled pontoon hull.  Cutterhead is 102 inches, dredging depth max in 12-ft. Capacity of sludge processing is 85 yd3/hr. Discharge diameter is…

  • 12-inch Damien Submersible Pump and Power Unit

    12-inch Damien Submersible Pump and Power Unit

    • 218,000 USD
    • 220811-DU

    Damien DOP PUMP / 3025 with Power Pack. This Pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico          …

  • 4-inch Submersible Pump Dredge w/Jet Bar

    4-inch Submersible Pump Dredge w/Jet Bar

    • 267,000 USD
    • 220613-DU

    EDDY Pump industrial Dredge Sleds are non-clog pumps designed for high solids industrial pumping applications. The patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications. Features include non-clog, high viscosity, high specific gravity, high abrasive, low pH pumping design, transport 40-70% solids and ability…

  • 10-inch Swinging Ladder Dredge

    10-inch Swinging Ladder Dredge

    • 271,000 USD
    • 220607-DL

    Built in 1997 and rebuilt/refurbished in 2012, the swing ladder dredger has an overall length of 64-ft 4-in, a transportation width of 11-ft 10-in and an operating width of 18-ft 6-in. Mean draft is 30-in. Max dredging depth is 18-ft and min is 3-ft. The dredge pump has a suction diameter of 12 inches and…

  • 8-inch Horizontal Cutter Dredger Mud Cat MC275D

    8-inch Horizontal Cutter Dredger Mud Cat MC275D

    • 410,000 USD
    • 220514-DH

    This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…

  • 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D

    8-inch Horizontal Cutter Suction Dredge Mud Cat 115D

    • 260,000 USD
    • 220608-DH

    Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutterhead with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of 4.3…

  • 12-inch Horizontal Dredge IMS 5012-HP

    12-inch Horizontal Dredge IMS 5012-HP

    • 218,000 USD
    • 220304-DH

    Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…

  • 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant

    14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant

    • 869,000 USD
    • 220402-DB

    The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…

  • 8-inch Horizontal Cutter Dredge Mudcat MC-15

    8-inch Horizontal Cutter Dredge Mudcat MC-15

    • 77,000 USD
    • 220211-DH

    This Mud Cat dredge is ideal for most horizontal auger dredge applications, including agricultural and industrial ponds, marina maintenance, canals, etc. The dredger is powered by a Detroit Diesel 6-71 RC/model 6030N) with 175 hp @1800 RPM. It has a dredging depth of 15-ft. Comes with 250-ft of 10″ fixed HDPE pipe. Location: State of…

  • 12-inch IMS 5012 Horizontal Cutter Dredger

    12-inch IMS 5012 Horizontal Cutter Dredger

    • 153,000 USD
    • 220202-DH

    One-truck transportable hydraulic dredge features IMS’s patented Starwheel® drive self-propulsion system eliminating the need for cables or spuds. The 5012 LP is ideal for lake, canal, and river dredging projects. Built in 1997 the dredger has 4,387 working hours. Powered by a Cummins Diesel engine with 250 hp. Propulsion is by Starwheel Drive self-propulsion. Additional…