Hydraulic Dredgers

Dredge Overview The MD-820P dredge is the largest of the standard VMI horizontal mini-dredge line. With all the features of our smaller horizontal cutter models this machine produces over 3000 GPM of flow. With the standard recessed impeller pump able to pass spherical solids up to 7 ¾” inch diameter this machine is ready to…

Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 is self-propelled dredge that gives you unparalleled control and flexibility. You can…

Dredge Info 2016 VMI MD-815 8″ Horizontal Auger Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster pump (250604)…

Truck transportable, cable driven dredge. Location: Iowa Dredge Details Model: 1993 IMS Versi-Dredge 4010 Type: Hydraulic Horizontal Cutterhead Dredge SN: 1882 4311 HRS Engine: 5.9L Cummins 177 HP diesel engine Dual 90-gallon fuel tanks Barge dimensions: L 24’6″ x H 36″ x W 8′ Overall Width 8’6″ Overall Length 31′ Mean DRAFT 30″ 17,000# with…

4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…

The Rotomite 6000 dredger is easily truck transported and can be used in a wide range of dredging operations from municipal and industrial applications to conservation projects. Quick Overview One owner dredge Articulating cutterhead to keep the cutting teeth at right angles to the face of the dredged material The hydraulic thruster on the Rotomite…

6 inch horizontal cutterhead dredge with John Deere 163 HP Turbo diesel engine. The dredge is fully operational in good working order. Location: Alabama Dimensions & Info Length: 30 ft. Width: 10 ft. Great running condition with Joy stick paddle wheel propulsion Floatation in compartments. Will not sink 8 inch discharge HDPE pipe available also…

This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…

Location: Canada Principal CharacteristicsNew Hydraulic pumpRebuilt Engine 5.9 CumminsRebuilt dredging pump 10″Stainless Steal Ponton All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice

Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with suction of…

LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…

Built in 1999 with only 1,700 working hours. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and marina dredging projects.…

LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…

Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…

Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of…

This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Location: Southern British Colombia, Canada           Principal Dimensions and Characteristics   Length Over All 89-feet     Beam: 17-feet…

The dredger was built in 2004 has and has 6025 total runtime hours. It has been sandblasted and painted every year since 2004. The dredge is in top running condition and currently working. Comes with 1000′ of 10″ HDPE pipe and 200′ of Flex Hose. Location: State of Texas, USA          …

This 20-inch Ellicott 1870 Cutter Suction Dredge is a medium/large size dredge that is portable and truckable to an inland location. Through the use of two large diesel engines, the production rate is quite high for a portable dredge. The 1870 is able to dredge up to 15 m deep, allowing it to work in…