-
Floating Crane / Grab Dredge (Non propelled)
Non propelled floating crane / grab dredger for sale. Crane had major repair work done in 2021. Location: Germany Quick Overview Vessel Type: Vessel Type: Floating Crane / Dredger Registry: Germany (ZSUK) “Unionszeugnis” gültig bis 27.10.2025 Year of Build (pontoon): 1990 Year of Build (crane): 1989 Shipyard (Pontoon): Hermann Sürken GmbH & Co. KG, Papenburg…
-
4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
Excavator Dredge Based on P-944 Excavator
Pontoon F 600 with Pontoon Excavator P 944. Excavator has 2 buckets – 5.6m3 and 2.1 Pontoon length is 22.0 m (72-ft), width of 7,48 m (24.5-ft) and max flotation depth of 1,10 m (26-inches). Spuds has a length of 8.5 m (28-ft) however there is a 2m bolt in section that extends the spud…
-
4 m3 Power Shovel Type Excavator Dredger
The dredger was built in 1977 in Japan. It’s classifications is Russian River Register (O-PR 2.0 (Ice 20) and has a navigation area of < 20 miles from a shore. Its dredging depth is 3-20m. Total power is 1530 kW. Gross tonnage is 1,099 and Deadweight is 400t. Location: Baltic Sea General Year Built: 1977…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi S6N-MPTA Crane
6 m3 Grab Bucket Dredger was built in 1976. The dredge has a length of 33.62 m, a breadth of 15.0 m and depth of 2.50m. The crane is a SKK 570 GDX-F with a capacity of 100 tons. Boom length is 28.0 m. Dredging capacity is 570 m3/h. The main engine is a 145hp…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. The dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main engine is…