-


36 ft. x 12.5 ft. Work Spud Barges (2)
- 50,000 USD
- 210402-BW
- Location: Texas
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-


Sold – M33 Deck Barge With A-Frame
- 39,600 USD
- 240912-BD
- Location: Louisiana
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-


Sold – 30′ Raked Bow Work Barge
- 100,000 USD
- 250109-BW
- Location: Louisiana
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-


Sold – 17 m, 471 kW Transport Vessel/Landing Craft
- 145,000 EUR
- 200122-VW
- Location: Portugal
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-


Not Available – 16-tonne Floating Crane and Grab Dredger
- 477,000 EUR
- 230203-BL
- Location: Germany
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-

Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
- 425,000 USD
- 210803-BW
- Location: New Jersey
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-


SOLD: 240-Person Accommodations/Work Barge
- 4,750,000 USD
- 200103-BA
Built in 2001 in Indonesia, this work barge has accommodations for 240 persons. The barge is 100 m x 30.5 m with 1300 m3 of free deck space and a helideck. The deck crane is an Amclyde Unit Model 35000 HD Pedestal Crane with 46 m boom. Location: Bangladesh …
-


SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
- 110,000 USD
- 200311-BD
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-

SOLD: 7905 DWT Ballastable Barge for Charter
- 200916-BD
- Location: Northern Europe
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-


SOLD: 269 man Accommodations / Work Barge w/DP2 for Charter
- 160204-BA
- Location: Gulf of Mexico
This 269 man Accommodations / Work Barge w/DP2, is classed as * A1 (Work & Accommodation Barge) DPS-2. Located in the Gulf of Mexico Dimensions and Characteristics Length Over All: 116.30 m 382 feet Molded Beam: 31.90 m 105 feet Molded Depth: 7.60 m 25 feet Max. Molded Draft: 5.60 m 18 feet GRT/NRT: 7,217/2,165…
-


SOLD: 4 Point Mooring 30 men Accommodation Working Barge
- 1,135,000 USD
- 150203-BP
This 4 Point Mooring 30 men Accommodation Working Barge was built in 2011 and its Classification Society is BV (Bureau Veritas). The next Dry Docking and Special Survey are due in October, 2016. Flag: Panama Located in the Middle East “As Is, Where Is” Basis Principal Dimensions and Characteristics Year Built: 2011 …
-


SOLD: 195-man Self Propelled Accommodations Barge New-Build
- 31,320,000 USD
- 140127-BA
This 195-man Self Propelled Accommodations Barge was built in 1998 and was rebuilt / refurbished / had total upgrade in 2010, class issued as built in 2010 (except hull part). Located in Singapore Principal Dimensions and Characteristics Year Built: 1998 Year Rebuilt/Refurbished/Total Upgrade: 2010 Length Over All: 90.60 m 297 feet…
-


Sold – Loader Barge with Barko Crane
- 110,000 USD
- 240924-BL
- Location: Florida
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-


Sold – 300 PAX Accommodations Barge
- 5,100,000 USD
- 251203-BA
- Location: Malaysia
Vessel Info 300 PAX accommodations barge for sale. Built in 2011 and located in Malaysia. Safety, rescue, and firefighting equipment include: 24 25 person life rafts, fire extinguishers, fixed CO2 for paint store and engine room, One 6 person rescue boat (RHIB c/w davit launch), 4 x foam monitor on helideck, Smoke Detector and water…
-


Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
- 468,000 USD
- 161204-VS
- Location: Texas
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-


SOLD: 300-tonne Floating Revolving Crane
- 211,000 EUR
- 220503-BL
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
-


Sold – 2,200-tonne Floating A-frame Crane Luffing Type
- 20,410,000 USD
- 220600-BL
Built in 2014 in Korea, the floating crane barge is registered in Panama. It has a GT of 9205 Ton and NT of 2361 Ton. The max lifting capacity if 2,200 Ton with 2 JIB Luffing Type. Lift Height from deck is 87 m with a boom angle of 65 degrees.Outreach from bow is 29.3…
-

Sold – 28 m x 16.2 m x 3 m Heavy Spud Barge
- 201015-BD
- Location: Middle East
This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…



