-
10×20 Service Barge
Location: Florida General Information Dimensions: 10′ x 20′ Power: Yamaha F150 Outboard Equipment and Other: Gantry crane, Single Pilot Station, Tool Boxes All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices…
-
Dock Barge with 7543 Tiger Crane
Dock / deck barge with 7543 Tiger Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 115 Yamaha Outboard Crane Information Model: 7543 Tiger Crane with Power Pack Elevated Helm Hydraulic Cat Head 2 Spuds All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy…
-
Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 All details on these pages…
-
New – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35’x12.6″x36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana All details on these pages are given in good faith and…
-
New – M36 Deck Barge With Spuds
M36 Deck barge in good condition and ready to work. This barge is part of a package deal with another deck barge linked below. 35’x12.6″x42″ With Spuds Package Deal; M33 – 35’x12.6″x36″ deck barge with A frame M36 – deck barge with spuds Location: Louisiana All details on these pages are given in good faith…
-
25,000 m3 Sand Carrier / Conveyor Unloading Sand Ship
This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt conveyor to unload granular…
-
16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
57 m Hold Barge, 1135 DWT
Hold barge built in 1970 with certification that expires November 2024. The barge has a length of 57.38 m, width of 8.8 m and depth of 3.52 m. Available for sale or charter Location: Netherlands General Information Built: 1970 Certification: Expires November 2024 Principal Dimensions and Characteristics …
-
SOLD: 46 m x 16 m x 3 x Flat Deck Pontoon (Deck Barge) w/ Fuel Cargo Tank
This barge was originally built in 1994/95. It is registered Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 and classed Germanischer Lloyd 100 A 5 I “Ponton” – discontinued. It has a 20.000 liter diesel tank. Location: Germany Principal Dimensions and Characteristics Built: 1994/95 Registry: Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 Class: Germanischer…
-
300-tonne Floating Revolving Crane
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
-
2,200-tonne Floating A-frame Crane Luffing Type
Built in 2014 in Korea, the floating crane barge is registered in Panama. It has a GT of 9205 Ton and NT of 2361 Ton. The max lifting capacity if 2,200 Ton with 2 JIB Luffing Type. Lift Height from deck is 87 m with a boom angle of 65 degrees.Outreach from bow is 29.3…
-
28.90 x 13.65 x 2.63 m Excavator Pontoon (Deck Barge)
The deck barge was built in 1976 and rebuilt in 2019. Comes with spud legs and lifting winches. Spuds (2) have a height of 14 m. Draft 0.65 m. Hydraulic vertical support legs built for the pontoon provides positioning depth of 12 meters. The total useful area of the pontoon is 394.5 m2. Location: Baltic…
-
357 m3 Non-Self-Propelled Bottom Dumping Hopper Barge
For sale or charter. Built in 1980 in Portugal. The barge has a length of 44.89 m and a breadth of 8.16 m. DWT is 826 tonnes. Location: Northern Europe General Built: 1980 / Portugal Hull Material: steel Principal Dimensions and Characteristics Length Over All: 44.89 m 147.3-ft Breadth: 8.16 m 26.77-ft DWT: 826 tonnes…
-
128 m3 New Non-Propelled Split Hopper Barge
NEW BARGE – Just used for testing. Built in 2020. The 128 m3 hopper capacity has a load capacity of 150 tons. Barge opening system is with hydraulic actutors – Iveco diesel hydraulic unit new with 150hp. Length is 24.146 m and width is 7.520 m. Location: Northern Europe General…
-
49.6 m x 19.5 m x 4.3 m Flat Top Barge, 1,800-tonne Dead Weight
Available for charter. Built in 1977 in Italy the barge is non-self-propelled. Class is RINA International 20 nm Offshore. 49.6 m x 19.5 m x 4.3 m Flat Top Barge has a GT to 1080 tonnes. Free space for loading: complete – bollards under deck. Authorized RoRo embarkment: by ramp driveable capacity T90 – per…
-
550 m3 Self-Propelled Bottom Dumping Hopper Barge
Built in 1990 in Russia, the barge has a steel hull. It has a Class Scoieth and Notation of Phoenix 3nm offshore. Hooper capacity is 550m3 (719 yd3). It is powered by 2 overhauled VOLVO PENTA TD 162 with propulsion power of 2 x 220hp. Max speed is 9 knots and cruising speed is 6.5…
-
400m3 Split Hopper Barge
Built in 1983 in Germany, the hopper barge has a classification of Russian River Register (O-PR 2.0 (Ice 20)). The hopper has a capacity of 400m3 with a load of 850t. The barge is powered by 2 x 220 kW diesel engines. Loaded speed is 4 knots and empty speed is 10 knots. The barge…
-
950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab
This 950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab was built in 2006 and the Classification Society is Inspeccion de Buques de la Direccion General de la Marina Mercante (Spanish Local Class). The vessel was last dry docked in the summer of 2015 for approx. 80/90 days in Spain. New navigation equipment was…
