-
1,300 m3 Split Hopper Barge, Reinforced for Rock
Built in 2010, the barge hopper is 35mm thick and can be used for rock & stone. The main engine is 2 NINGDONG with 2 x 473 hp. Maximum speed is 11 knots. The barge length is 64.85 m, beam is 13.2 m and depth is 4.6 m. Location: Malaysia General Built: 2010 Class Society…
-
91 m, 7,400 DWT Deck Barge
Built in 2012 in China, it was used by the shipyard that built her for light shipyard work. The barge remains in very good condition and ready to be put in service.. Ramp door & hydraulic winch were installed in 2019. Barge is 91.5 m in length, 24.4 m in breadth and has a depth…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2007. Port of Registry is Korea. Ballast tank capacity is 11,838 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200806-BD Location: South Korea General Built Year: 2007 Class: Flat Barge Port of…
-
96.7m x 19.8 m x 5.75m Self Propelled Deck Barge w/Ramp
Powered by 2 CUMMINS K50-M with 1342 kW (1825 hp) each has a max speed of 12.3 knots and a service speed of 11.8 knots. The barge has fixed pitch propulsion. GT is 2676 and dead weight is 5060 Ton. The barge was built in 2017 in China and its Port of Registry is Korea.…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2011. Port of Registry is Korea. Ballast tank capacity is 11,868 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200805-BD Location: South Korea General Built Year: 2011 Class: Flat Barge Port of…
-
Revolving Crane Barge with Towing Tug & Pusher Boat
The barge was built in 1997 in Japan. It has a hold capacity of 1020 m3. The crane is a SKK-16010GDT-AS with a lift capacity of 165 tons and includes a grab bucket of 12 m3 x 20 tons. The barge has 2 sets of spuds. It is reported to be in good operating condition.…
-
40 m x 24 m, 560-tonne payload Jack Up Barge
Built in 2018, the spuds are 30 m (98-feet) and are operated with both a winch and jacking cylinders. It has accommodations for 2 persons. Location: Korea Principal Dimensions and Characteristics Year Built: 2018 Length: 40 m 131-feet Beam: 24 m 78.7-feet Depth: 3.2 m 10.5-feet Draft: 2.5 m 8.2-feet…
-
1,000 m3 Non-Self-Propelled Split Hopper Barge
This listing is for a 1,000 m3 Non-Self-Propelled Split Hopper Barge that was built in Japan in 2001. Flag: Korea / KST, Coastal Location: Korea Principal Dimensions and Characteristics Year Built: 2001 Length Over All: 48 m 158 feet Length: 46.10 m 151 feet Beam: 13…
-
400-ton Floating Crane with Notch Tug
This 400-ton Floating Crane with Notch Tug was built in 1994 in Japan. Located in Japan “As Is, Where Is” Basis Principal Dimensions and Characteristics Barge Year Built: 1994 Length Over All: 63.00 m 207 feet Beam: 24.00 m 79 feet Depth: 4.00 m 13 feet Draft: 3.00 m…
-
150-tonne Crane Barge with 4-point Mooring
This 150-tonne Crane Barge was built in 2003 and its Classification Society is BKI (Biro Klasifikasi Indonesia). Located in Indonesia Principal Dimensions and Characteristics Year Built: 2003 Classification Society: BKI (Biro Klasifikasi Indonesia) Length Over All: 52.67 m 173 feet Beam: 18.29 m 60 feet Depth: 3.05 m 10 feet GRT/NRT: 776/233 Fuel Oil…
-
4,000 m3 Bottom Dumping Hopper Barge
This 4,000 m3 Bottom Dumping Hopper Barge was built in January, 2001 in Japan. It’s Classification Society / Notation is KST (Korea Ship Safety Technology Authority), Navigation Area is Great Coastal. Its last S. S. was in October, 2013 and its last I. S. was passed in May, 2011. This barge can be used for both…
-
250-tonne Floating Crane
This 250-tonne Floating Crane was built in 1983 in Japan. Located in Japan Principal Dimensions and Characteristics Barge Year Built: 1983 Length Over All: 65 m 213 feet Beam: 25 m 82 feet Depth: 5 m 16 feet Draft (Full Load): 3.04 m 10 feet Draft (Empty): 1.8…
