-
28 m x 16.2 m x 3 m Heavy Spud Barge
This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…
-
330-Person Accommodations Barge
Built in 2009 in Korea, the barge flag is Marshall Island and Classification and Notation is ABS + A1 Barge. The barge is 100m (328-ft) in length and has a breadth of 30.50m (100-ft). Clear deck area is 1,335 m2. Lift equipment includes a 68 tons @ 6.8 m radius main hoist, a 11 tons…
-
61.44 x 16.17 x 3.85 m Deck Barge DWT 2000
Max deck load of 12 T/m2. Barge has 10 ballast tanks and 2 ballast pumps and 6 ballast main pipe lines. Ballast tanks are hard coated. New build 2020 in Turkey and has a Class of RINA. The barge NT is 264T and GT of 882T. Location: East Mediterranean General Built Year / Place: 2020…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
610-tonne Payload Jack-Up Barge for Charter
This 42 x 23.5 Jack-Up barge has available deck area of 800 m2 and a deck load of 10T/m2. The barge has 4 x 37.5 m spuds. Maximum elevated height is 26.6 m. The barge was built in 1999, it’s flag is St Vincent & The Grenadines. Class Society and Notation is BV I Hull…
-
400 m3 Self-Propelled Split Hopper Barge
Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2011. Port of Registry is Korea. Ballast tank capacity is 11,868 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200805-BD Location: South Korea General Built Year: 2011 Class: Flat Barge Port of…
-
96.7m x 19.8 m x 5.75m Self Propelled Deck Barge w/Ramp
Powered by 2 CUMMINS K50-M with 1342 kW (1825 hp) each has a max speed of 12.3 knots and a service speed of 11.8 knots. The barge has fixed pitch propulsion. GT is 2676 and dead weight is 5060 Ton. The barge was built in 2017 in China and its Port of Registry is Korea.…
-
1700 m3 Self-Propelled Split Hopper Barge
This barge has a class INSB with a navigation area of Trips Coastal, 20 NM of shore. The barge is 74.35 m (244.5-ft) in length, with a beam of 14.0 m (50-ft) and depth of 4.5 m (14.8-ft). Deadweight 3000T. The barge is powered by 2 X JINAN, G6190 with 540 kW @ 1450RPM. The…
-
92m x 36m x 5.8m 12,000 DWT Ballastable Deck Barge
The deck barge was built in 2007. Port of Registry is Korea. Ballast tank capacity is 11,838 T with the ballast pump capacity of 2,000T/h. The deck load capacity is 10 T/m2. Can be purchased in package with sister barge – see #200806-BD Location: South Korea General Built Year: 2007 Class: Flat Barge Port of…
-
80 m x 20 x 4 m – Ballasted Deck Barge
Built in 1998 in Denmark, the deck barge has a surface load of 15 T/m2 or bogie load of 32.0 T. Ballast water capacity is 8615,5 T with ballast pump capacity of 2 x 600 m3/h. Location: East Mediterranean General Built Year: 1998, Denmark Principal Dimensions …
-
1,350 m3 NEW BUILD Self Propelled Hopper Barge
Bottom door dump barge is 90% complete. Estimate 2 months to complete upon purchase agreement. Barge has 16 bottom doors, 8 cells. Hydraulic system opens doors. The barge is powered by 2 engines each with 800 hp (597 kW) and 2 Schottlet propellers. The barge has accommodations of 5 x cabins (1 Master’s and 4…
-
200-tonne Ravestein Jack Up Barge
The platform consists of multiple pontoons (16 units), each with outer measurements of a standard 40’ sea-container. The two outer pontoons are each with two legs wells and connections lugs for the hydraulic lifting system. The lifting system mainly consists of four legs, four removable hydraulic lifting systems, a power system and a control panel.…
-
Revolving Crane Barge with Towing Tug & Pusher Boat
The barge was built in 1997 in Japan. It has a hold capacity of 1020 m3. The crane is a SKK-16010GDT-AS with a lift capacity of 165 tons and includes a grab bucket of 12 m3 x 20 tons. The barge has 2 sets of spuds. It is reported to be in good operating condition.…
-
40 m x 24 m, 560-tonne payload Jack Up Barge
Built in 2018, the spuds are 30 m (98-feet) and are operated with both a winch and jacking cylinders. It has accommodations for 2 persons. Location: Korea Dimensions and Characteristics Year Built: 2018 Length: 40 m 131-feet Beam: 24 m 78.7-feet Depth: 3.2 m 10.5-feet Draft: 2.5 m 8.2-feet …
-
2,500 m3 Self-Propelled Hopper Barge
This listing is for a 2,500 m3 capacity Split Hopper Barge with twin fixed pitch propellers. This vessel was designed for a trailing suction hopper dredger. But the suction system is not installed. It is operated as a dumping door barge. There are 16 bottom doors which are operated by two electric controllers near front…
-
1,000 m3 Non-Self-Propelled Split Hopper Barge
This listing is for a 1,000 m3 Non-Self-Propelled Split Hopper Barge that was built in Japan in 2001. Flag: Korea / KST, Coastal Location: Korea Dimensions and Characteristics Year Built: 2001 Length Over All: 48 m 158 feet Length: 46.10 m 151 feet Beam: 13 m 43 feet Depth: 4.10…
-
20-inch Booster Barge
This listing is for a 20-inch Booster Barge that was built in Holland by IHC. It was last run about one year ago. Location: Adriatic Sea Principal Dimensions and Characteristics Pump: Make/Model: Royal IHC (Holland) type 128,5-22,5-45 Discharge Diameter: 500 mm 20 inches Suction Diameter: 500 mm 20…
