Dredging Equipment – Dredge Brokers





Filters
Search

Category

Location

  • 25,000 m3 Sand Carrier / Conveyor Unloading, Suction Loading

    25,000 m3 Sand Carrier / Conveyor Unloading, Suction Loading

    • 16,000,000 USD
    • 230500-BC

    This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt conveyor to unload granular…

  • 850 mm (34-inch) Cutter Suction Dredger

    850 mm (34-inch) Cutter Suction Dredger

    • 30,000,000 USD
    • 221007-DB

    Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…

  • 750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

    750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600

    • 1,330,000 USD
    • 220802-DB

    The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…

  • 8000 m3 Trailing Suction Hopper Dredger (TSHD)

    8000 m3 Trailing Suction Hopper Dredger (TSHD)

    • 220610-DS

    The 8000 m3 hold capacity dredger has a dredging depth of 38 m. The dredge pumps are IHC HYTOP/HRMD172-36-85 x 2 sets, 10800 CBM. Method of discharge is rainbowing. GT/NS is 8031/4497. The overall length is 121 m, the breadth is 22 m and depth is 9 m. Draft is 4.182 m / 6.50 m.…

  • 7316 m3 Trailing Suction Hopper Dredge (TSHD)

    7316 m3 Trailing Suction Hopper Dredge (TSHD)

    • 28,800,000 USD
    • 210807-DS

    Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China           General   Built: 2021, China   Flag:…

  • 2690 m3 Trailing Suction Hopper Dredger (TSHD)

    2690 m3 Trailing Suction Hopper Dredger (TSHD)

    • 1,000,000 USD
    • 190302-DS

    Launched in 2006 by Fujian Xiongying Shipyard. The dredger’s voyage area is Coastland & (A1 +A2). Loading time for the 2690 m3 hopper is 45 minutes. Discharge time is 15 minutes. Flowing for slop pump is 6500m3/h. Dredging depth underwater is 30 m (98.4-ft). The dredger has a length of 87.8 m (288-ft), a beam…

  • 1,500 m3 Trailing Suction Hopper Dredger (TSHD)

    1,500 m3 Trailing Suction Hopper Dredger (TSHD)

    • 200804-DS

    Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…

  • 60 m3 & 40 m3 Grab Dredger For Charter

    60 m3 & 40 m3 Grab Dredger For Charter

    • 200902-DG

    This dredger is the first engineering vessel accredited by China Classification Society for unlimited navigation area. The vessel is driven by propellers and equipped with two 360 ° rotary cranes, mainly engaged with wreck salvage and dredging, with a prominent advantage over its competitors in the industry of deep-water salvage and dredging. The 60 m3 dredging…

  • 2,400 m3 Trailing Suction Hopper Dredger (TSHD)

    2,400 m3 Trailing Suction Hopper Dredger (TSHD)

    • 200803-DS

    Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…

  • 2690 m3 Trailing Suction Hopper Dredger (TSHD)

    2690 m3 Trailing Suction Hopper Dredger (TSHD)

    • 2,670,000 USD
    • 200707-DS

    Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZ­RBV8M540 3200…

  • 6500 m3 Non-Propelled Cutter Suction Dredge

    6500 m3 Non-Propelled Cutter Suction Dredge

    • 190810-DB

    This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Principal Dimensions and Characteristics   Year Built: 2019 / China   Classification CCS Unrestricted Navigation   Length…

  • 2,500 m3 Self-Propelled Hopper Barge

    2,500 m3 Self-Propelled Hopper Barge

    • 1,590,000 USD
    • 190307-BS

    This listing is for a 2,500 m3 capacity Split Hopper Barge with twin fixed pitch propellers. This vessel was designed for a trailing suction hopper dredger. But the suction system is not installed. It is operated as a dumping door barge. There are 16 bottom doors which are operated by two electric controllers near front…

  • 10,000 DWT, 116 m Self-Propelled Deck Barge with Bow Ramp

    10,000 DWT, 116 m Self-Propelled Deck Barge with Bow Ramp

    • 3,500,000 USD
    • 190808-BD

    The 10,000 DWT, 116 m Self-Propelled Deck Barge w/ Bow Ramp was built in 2007 and rebuilt in August 2019. It’s classification is China ZC class. Flag: China. Suitable for carrying rock stone, coal, heavy equipment, container and heavy equipment/machines. Location: China           Principal Dimensions and Characteristics   Year Built: 2007…

  • 20-inch Cutter Suction dredger, IHC Beaver 1600

    20-inch Cutter Suction dredger, IHC Beaver 1600

    • 800,000 USD
    • 171104-DB

    This 20-inch Cutter Suction dredger, IHC Beaver 1600 was built in Holland in 2000. The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. Among the salient features of the vessel are the compact dredge pump drive incorporating a reduction gearing with integrated pump bearing, and a fresh water engine…

  • 5364 hp, 70-tonne BP ASD Tug with FiFi

    5364 hp, 70-tonne BP ASD Tug with FiFi

    • 5,680,000 USD
    • 170411-VN

    This 5364 hp, 70-tonne BP ASD Tug with FiFi was recently built in 2017 and its’ Classification Society and Notation is LR (Lloyd’s Register). Flag: TBA Location: China           Principal Dimensions and Characteristics   Classification Society/Notation: LR (Lloyd’s Register)   Length Over All: 32 m 105 feet   Length DWT: 30.085…

  • 800 mm (32-inch) Cutter Suction Dredger (CSD)

    800 mm (32-inch) Cutter Suction Dredger (CSD)

    • 150912-DB

    This 800 mm (32-inch) Cutter Suction Dredger (CSD) was built in 2009 and its Classification Society and Notation is CCS (China Classification Society), Unrestricted Navigation. Flag: China Located China   Principal Dimensions and Characteristics   Year Built: 2009   Classification Society/Notation: CCS (China Classification Society),     Unrestricted Navigation   Length Over All: 108.00 m…

  • 2,000 m3 Trailing Suction Hopper Dredger (TSHD) (3-Sisters)

    2,000 m3 Trailing Suction Hopper Dredger (TSHD) (3-Sisters)

    • 1,970,000 USD
    • 150806-DS

    This 2,000 m3 Trailing Suction Hopper Dredger (TSHD) was built in 1975 in Holland and its Classification Society is CSS (China Classification Society). Located in China Price is for each Dredger   Principal Dimensions and Characteristics   Year Built: 1975   Classification Society: CSS (China Classification Society)   Length Over All (w/ ladder) approx.: 83.85…

  • 106 m 13,000 DWT Self-Propelled Deck Barge

    106 m 13,000 DWT Self-Propelled Deck Barge

    • 34,500,000 USD
    • 140935-BD

    This 106 m 13,000 DWT Self-Propelled Deck Barge was launched in 2015 in China and its Classification Society & Notation is CCS (China Classification Society), Navigation Area: Unrestricted. Flag: China Located in China   Principal Dimensions and Characteristics   Year Built: 2013   Classification Society: CCS (China Classification Society)   Class Notation: Navigation  Area: Unrestricted…