-
2024 VMI Horizontal Dredge
Dredge Overview The MD-820P dredge is the largest of the standard VMI horizontal mini-dredge line. With all the features of our smaller horizontal cutter models this machine produces over 3000 GPM of flow. With the standard recessed impeller pump able to pass spherical solids up to 7 ¾” inch diameter this machine is ready to…
-
Rotomite Self-propelled Dredge
Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 is self-propelled dredge that gives you unparalleled control and flexibility. You can…
-
2016 VMI 8″ Horizontal Auger Dredge
Dredge Info 2016 VMI MD-815 8″ Horizontal Auger Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster pump (250604)…
-
4″ Cutterhead Dredge
4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…
-
Rotomite 6000 Dredge
The Rotomite 6000 dredger is easily truck transported and can be used in a wide range of dredging operations from municipal and industrial applications to conservation projects. Quick Overview One owner dredge Articulating cutterhead to keep the cutting teeth at right angles to the face of the dredged material The hydraulic thruster on the Rotomite…
-
6 inch Horizontal Cutterhead Dredge
6 inch horizontal cutterhead dredge with John Deere 163 HP Turbo diesel engine. The dredge is fully operational in good working order. Location: Alabama Dimensions & Info Length: 30 ft. Width: 10 ft. Great running condition with Joy stick paddle wheel propulsion Floatation in compartments. Will not sink 8 inch discharge HDPE pipe available also…
-
18″ x 18″ Custom Shark Dredge
This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…
-
10″ Horizontal Auger Dredge
Location: Canada Principal Characteristics New Hydraulic pump Rebuilt Engine 5.9 Cummins Rebuilt dredging pump 10″ Stainless Steal Ponton Our inventory changes weekly. If you don’t see what you’re looking for, please call Justin at +1 (281) 248-8158 or email us.
-
24-inch Cutter Suction Dredger (CSD)
Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with suction of…
-
12-inch Horizontal Dredge IMS 5012-HP
Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-4
LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-5
LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…
-
8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of…
-
10-inch Cutter Suction Dredge
This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Location: Southern British Colombia, Canada Dimensions and Characteristics Length Over All 89-feet Beam: 17-feet Depth:: 4.5-feet …
-
10-inch Horizontal Cutter Dredge – IMS 5012-HP
Dredger Info The dredger was built in 2004 has and has 6025 total runtime hours. It has been sandblasted and painted every year since 2004. The dredge is in top running condition and currently working. Comes with 1000′ of 10″ HDPE pipe and 200′ of Flex Hose. Location: State of Texas, USA Dimensions and Characteristics…
-
Sold – 3″ Remote Controlled Crisafulli Dredge
Motivated Seller. Remote controlled dredge with horizontal auger. Operates in a cable environment and can be partially or fully automated. The FLUMP (floating lagoon pumper) are simple to operate, and easy to transport. The dredge operator isn’t exposed to potentially hazardous dredged materials. Remote control is user friendly and works in rain. Pontoons are 4.27…
-
Sold – IMS 7012 HP Versi-Dredge®
The IMS Model 7012 HP Versi-Dredge® is a hydraulic dredge that’s self-propelled, and truck transportable. Price includes all spare parts. Location: Malaysia Ideal for; Dredging ports Lakes Canals Rivers Beach restorations Quick Overview Manufacturer: IMS Dredge Year Built: 2018 Optional equipment Dredge Automation GPS Dredging System Production Instrumentation Swing winches for conventional operations Traveling spud…
-
SOLD: 12-inch Horizontal Cutter Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…