Dredging Equipment – Dredge Brokers

Brand new Mud Cat™ Dredge. This unit has zero hrs on it. It sat on a pond for about 4 months and then has been in a storage container ever since. This unit has several extra’s. Radio Remote control with hand held remote 600’ of Power Cord A/C unit for electrical enclosure Hydraulic oil cooling…

This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…

This 40 x 22 foot Cutter Suction Dredger has a dredging depth of 30-feet with a 12-inch suction diameter and 10-inch discharge diameter. The dredge pump was made by Georgia Iron Works. The cutter power is 60-63hp. SOLD Location: Florida General Built Year/Place: 1981 Principal Dimensions and Characteristics Length: 12.19 m 40-feet Length with Ladder:…

This 6-inch Horizontal Cutter Dredger was built in 2012, and has 1966 total runtime hours on it. It worked on one job-site for it’s entire life. The dredger is in great working condition and has no leaks, and no mechanical issues. It is ideal for sediment removal from small bodies of water such as (for…

This 10-inch Cutter Suction Dredger (CSD) Ellicott 370-26 has a simple design making it an ideal dredge for first-time owners. It is very easy to train on and operate and is easily portable by truck. The dredger has high durability and easy maintenance. The control system, engine, and mechanical components are specially selected for use…

Truck transportable, cable driven dredge. Location: Iowa Dredge Details Model: 1993 IMS Versi-Dredge 4010 Type: Hydraulic Horizontal Cutterhead Dredge SN: 1882 4311 HRS Engine: 5.9L Cummins 177 HP diesel engine Dual 90-gallon fuel tanks Barge dimensions: L 24’6″ x H 36″ x W 8′ Overall Width 8’6″ Overall Length 31′ Mean DRAFT 30″ 17,000# with…

The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…

1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA

One-truck transportable hydraulic dredge features IMS’s patented Starwheel® drive self-propulsion system eliminating the need for cables or spuds. The 5012 LP is ideal for lake, canal, and river dredging projects. Built in 1997 the dredger has 4,387 working hours. Powered by a Cummins Diesel engine with 250 hp. Propulsion is by Starwheel Drive self-propulsion. Additional…

The hull is composed of three compartments. The hull sides and deck is constructed from 10 gauge plate (3.57 mm). The bottom of the hull is constructed from 3/16” plate (4.7 mm). The ladder is constructed of 3”x3”x3/16” (76 mm x 76 mm x 4.7 mm) angle iron with 7 gauge (4.55 mm) metal plate…

Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…

2010 Crisafulli SD110 w/full cab, Yamaha 115 4 stroke engine and trailer. Also includes trailer full of pipe – approx. 500-ft. The dredger is a lightweight (9,000 pounds), small (25 x 8.5 foot) self-propelled pontoon hull.  Cutter head is 102 inches, dredging depth max in 12-ft. Capacity of sludge processing is 85 yd3/hr. Discharge diameter…

The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…

This 12-inch (305 mm) Cutter Suction Dredge built by Twinkle in 2002. The dredge is transportable with side pontoons removable. Twinkle Co rotary cutter baskets are designed and built for sand and gravel dredge mining. The cylindrical pontoons are inherently strong, which requires less steel per cubic foot of displacement. Location: State of Illinois, USA…

This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…

Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…

This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job. Location: Texas, USA Principal Dimensions and Characteristics   Year Built: 2014   Serial Number: 824   Length: 11.73 m 38.6 feet   Height (without A/C): 2.69 m…