-
Updated Price – 16-inch Cutter Suction Dredger (CSD) IHC Beaver 40
IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…
-
10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
-
18-inch Cutter Suction Dredger
Includes 18-inch Cutter suction Dredger, workboat, house boat, pipes and floaters. Running hours is approximately 18,000 hours. The dredger was built in 2017. It has a length overall of 22.78 m and a breadth of 8.25 m. Draft loaded is 0.84 m. Dry weight is 60 TON. Max. dredging depth is 15 m. Production capacity…
-
8-inch Bucket Wheeler Cutter Dredger
Neumann built 8” Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and the hydraulic…
-
900 mm 10,800 m3 Bucket Wheel Dredger (CSD)
Built in 1996 in Korea. this 2,525 GT dredger has a dredging depth of 6.5m to 30m. Capacity is 10,800 m3/hr and has a suction diameter of 950mm and discharge of 900mm. It has 2 spuds each with a diameter of 1000mm, thickness of 60mm, length of 45m and weight of 78 Ton. Main engines…
-
4.5 m3 Hitachi EX1900-6 Excavator Dredger
The Hitachi EX1900-6 has a dredging depth of 18.5 m, a bucket capacity of 4.5m3 and 810 kW power. The dredger has a 3 spud anchoring system with one of the spuds being a tilting spud. The dredge has a length of 36.5 m, breadth of 14 m and draught of 2.5 m. The dredge…
-
20,000-tonne Floating Dry Dock
Cassion Dock for transportation and launching. The Dry Dock has a lift capacity of 20,000 Ton and a Max draft of 5.7 m. It has a length of 76 m, an inside breadth of 48 m and outside breadth of 60.0 m. Ballast pump capacity is 3,000m3/h x 12m x 180Kw. It has 2 deck…
-
13 m3 Grab Bucket Dredger
Built in Japan in 1982, the dredger has a SKK 16013 GDT -A crane with a dredging depth of 50m (164-ft). The bucket is a light : 13m3 (40 Ton) / Heavy : 8m3 (45 Ton). The Rock Breaking Hammer capacity is 40 Ton/50 Ton. Gross tonnage is 2,098. Location: South Korea General Year Built:…
-
8 m3 Grab Bucket Dredger
646 Gross Ton dredger was built in 1979 in Japan. The crane is a SKK 808GDT-A with a dredging depth of 48m. Bucket size is light : 8m3 / Heavy : 5m3 and Rock breaking hammer of 25 Ton. Main engine is a MITSUBISHI S12A-MPTK with 910 HP x 1,900rpm. Location: South Korea …
-
8 m3 Grab Dredger
The 394 ton Grab Dredger was built in 1989 in Japan. The crane is a SKK-1508GDT-F with a dredging depth of 40m. Bucket size is light 8m3 (25 ton) and heavy 5m3 (30 ton). Lifting capacity is 40 ton, 400m3/hr. Engine power is 1310hp x 1800 rpm. The dredger has a length of 36.48m and…
-
16 m3 Grab Dredger
This 758 GT Grab Dredger was built in 1979 in South Korea. It is classed KST. It has a SKK-13016GDT-A crane with lifting capacity of 100 Ton(60°) at 24.4m ~ 48.0m, 136 Ton(80°) at 12.7m ~ 25.30m. The max dredging depth is 50m with a dredging capacity of 290m3/hr. Bucket capacity is 16(Light, 45ton) /…
-
600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
-
10 m3 Grab Dredger
Built in 1982 in Japan. The dredger has a SKK-1008GDT-A crane with a dredging depth of 40 m. Bucket capacity Light is 10m3 (25 Ton) and Heavy 6m3 (30 Ton) and two 35 Tom Hammer. The dredger has 2 23m spuds. The length is 41.31m, breadth is 16.0m and has a depth of 3.0m. The…
-
15 m3 Grab Dredger
770 GT Grab Dredger built in 1979 in Japan. It has a length of 49.94 m, breadth of 19.0m and depth of 3.5m. The spud is 38m. The SKK-16016 GDT-B crane has a24m boom and can dredge to a depth of 50m. Hoist speed is 65m/min. The bucket is 15m3 x 45 Ton (Light) and…
-
8 m3 Grab Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
22-inch/560 mm Self Propelled Submersible Pump Sand Dredger
Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is…
-
0.5 m3 x 75 Bucket Ladder Dredger 800 m3/hr
Built in 1986 in Japan. This dredger has discharge system of Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets. Dredging depth is min -6.0 m – max -18.5 m and a width of 60.0 m. It has 2 spuds that are 1,100 mm diameter and 38.0 mL. GT is 1,939 and NT is…
-
18-inch/450 mm Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
