-
Not Available – 8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
SOLD: 20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
Not Available: 12-inch Horizontal Dredge IMS 7012
The dredge was used in Florida on a peat bog for all 6,410 hours, so no major wear on the pump or cutter. This unit was repainted and refurbished at IMS’s factory for a total cost of $77,000. Some of the major components replaced included: Both Starwheel gearboxes, hydraulic cylinders, hydraulic valve bank, duo cone…
-
Sold – 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
-
Not Available: 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
Not Available: 10-inch Cutter Suction Dredger (CSD)
Fully reconditioned in 2002, the dredger was originally built in 1987. Dredge pump is a Warman with dredging depth of 10m (32.81-ft), a suction diameter of 305 mm (12-inch) and a discharge diameter of 254 mm (10-inch). Delivery of sand is 150 m3/h. The dredger is powered by V16 GM and 6 cylinder DAF with…
-
Not Available: 600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
-
Not Available: 22-inch/560 mm Self Propelled Submersible Pump Sand Dredger
Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is…
-
Sold – 6-inch Horizontal Cutter Dredger, LWT 3010 “Pit Hog”
This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location: State of Minnesota, USA …
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Not Available: IMS Model 4010-LP – 10-inch Horizontal Dredge
This IMS Model 4010-LP – 10-inch Horizontal Dredge was built in October, 1996. The Dredge was recently rebuilt in 2015 by CDW and it has new pontoons designed by CDW to fit existing footprint/frame. The entire hydraulic system was redone as well and the dredge was also painted. All functions operate. Engine assembly is original…
-
Sold – 10-inch Horizontal Cutter Dredge IMS 7012 HP “Versi-Dredge”
The machine was delivered to the seller new in 2007 and has 1,860 hours on the clock. It is in good working order. Located in the West of Ireland Principal Dimensions and Characteristics Length Over All: 15.7 m 51.5 feet Width: 3.6 m 11.8 feet Height: 3.2 m 10.5 feet …
-
Sold: Custom Self Propelled 8″ Horizontal Cutter Dredge with Gooseneck Trailer
Custom self-propelled 8″ Horizontal Cutter Dredger with Gooseneck trailer. Location: Georgia Specs Custom built, 8″ self-propelled dredge 7 ft cutter head on 21 ft elevator (part that moves while cutting) 2022 twin 90hp Yamaha 8″ discharge with a 6″ step down Enclosed cab 30′ Anderson Manufacturing Gooseneck Trailer VIN: 4YNBN2923LC090251 All details on these pages…
-
SOLD: Dino 6 Horizontal Cutter Dredge
2012 Dino 6 Hydraulic Horizontal Cutter Dredge, built in 2012 with only 120 hours. Ideal for sediment removal from small bodies of water like retention ponds, canals, marinas, sediment lagoons, and small lakes. This is a very portable dredge and has a customized tilting trailer to fit the dredge and discharge pipe. Located in the…
-
SOLD: 1998 VMI 815 8″ Auger Dredge
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
-
SOLD: 6-inch Horizontal Cutter Dredger “Dino 6”
This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutter head, boom, and cable system that was used on 1 small job after it was…
