-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
450 m3 Grab Bucket Loading Split Hopper Dredger
Built 1984 in France the 450 m3 split hopper dredger has a maximum dredging depth of 20 m (65.62-feet). The crane is a Liebherr Type B16/14-16VG with a 6.4 m3 bucket. It is powered by 2 Baudouin engines with total power of 1059 kw. Length is 52.5m, beam is 12.0m and has a draft of…
-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
2,300 m3 Crane Loading Split Hopper Dredger
Approx. 2300 m3 split hopper dredge. The dredge has a Liebherr HS895HD crane with 200 T lift capacity with arm of 41 m that can operate up to a max depth of 22 m (can be increased up to 50 m). The crane is fitted with 2 hydraulic grabs : one grab with a capacity…
-
900 m3 Self Propelled Split Hopper Backhoe Dredger
In progress vessel. Requires 3 months to complete. The 900 m3 hopper has a hydraulic splitting mechanism. The cargo capacity is 1100 T. The vessel is 63.50 m in length and 11.36 m in breadth. The main engine is 2 Cummins- NTA 855 with 400 hp each. Vessel can be purchased with or without a…
-
1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
1,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…
-
2,400 m3 Trailing Suction Hopper Dredger (TSHD)
Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…
-
2690 m3 Trailing Suction Hopper Dredger (TSHD)
Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZRBV8M540 3200…
-
27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
7000 m3 Trailing Suction Hopper Dredger (TSHD)
This 7200 m3 capacity hoop dredge has total installed power of 11,163 kW. Unloading can be handled by either pump ashore, bottom hump or rainbowing. Pumping distance is approximately 1500 m (4,921-feet) and rainbowing approximately 50 m (164-feet). The dredger has accommodations for 33 persons. Note that when current owners took delivery, dredger was comprehensively…
-
1365 m3 Trailing Suction Hopper Dredger w/ Rainbowing
This Trailing Suction Hopper Dredger has 2 x 460 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 600 mm (24-inch). The hopper can hold a max of 1365 m3 (1,785 yd3) and can unload via hydraulically operated bottom doors, pump ashore installation or rainbow installation capable 45° ± 35 m ashore. …
-
4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
4,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 2007 in China, this dredger has been working in Western India since 2007 with the same owner. The dredger has 22 section bottom dump Hopper with a hold capacity of 4500 m3 and a telescopic hydraulically operated weir level overflow system. The vessel has accommodations for 29 persons. Location: India …
-
522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out
This 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out was specially built in the Netherlands in 1965, was rebuilt in 1989 and has been modified several times since. Location: The Netherlands Principal Dimensions and Characteristics Year Built/Rebuilt: 1965 / 1989 Length: 72.65 m 238-feet Width: 7.12 m 23-feet Height:…
-
1,000 m3 Trailing Suction Hopper Dredger w/ Side Casting
This 1,000 m3 Trailing Suction Hopper Dredger w/ Side casting was built in 1978 in Japan. It’s Classification Society / Notation is KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger. Located in the Black Sea Dimensions and Characteristics Year Built: 1978 Classification Society: KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger Length…
-
242 m3 Hopper Dredge
This single drag arm Hopper Dredge was built in 1977 and its Classification Society is CLASS “T” Spanish. The hopper dredger is equipped with swell compensation. Flag: IMO Located in Spain Principal Dimensions and Characteristics Year Built: 1977 Classification Society: CLASS “T” Spanish Length Over All: 34.00 m 112 feet Beam: 8.50 m…
-
SOLD: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Launched in 2006 by Fujian Xiongying Shipyard. The dredger’s voyage area is Coastland & (A1 +A2). Loading time for the 2690 m3 hopper is 45 minutes. Discharge time is 15 minutes. Flowing for slop pump is 6500m3/h. Dredging depth underwater is 30 m (98.4-ft). The dredger has a length of 87.8 m (288-ft), a beam…
