Hydraulic Dredgers

  • DSC Moray Swinging Ladder Dredge Package

    DSC Moray Swinging Ladder Dredge Package

    • 490,575 USD
    • 251109-DL
    • Location: Alabama

    Dredge Overview DSC Moray Total Dredge Package, 8-inch DSC Moray Swinging Ladder Dredger for sale. This dredge is a submerged-pump swinging ladder dredge system built in 2009. Common applications include maintenance of lakes, canals, retention ponds, environmental cleanups and restorations. General Information Never been in salt water Engine rebuilt at 6,500 hrs. Has all documentation…

  • 14-inch x 12-inch AMMCO Dredge

    14-inch x 12-inch AMMCO Dredge

    • 425,500 USD
    • 150118-DB
    • Location: New Jersey

    Dredge Info This 14-inch x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. Hydraulic cutter suction dredge with a 14-inch intake and 12-inch discharge. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and…

  • Auger Type Float Dredge With Trailer

    Auger Type Float Dredge With Trailer

    • 77,000 USD
    • 260628-DH
    • Location: Michigan

    Dredge Overview Custom made, Mudcat type auger dredge, with cabin and trailer for sale. General Build Year: 1980’s Dredge Type: Auger Type Float Dredge Operating Hours: Unknown (current owner has put approximately 750 hours) Overall Condition: Good working order Maintenance: Maintenance done in house, no major repairs since purchase Specs 6-71 engine 8×8 pump Hydraulic…

  • 8″ Horizontal Cutterhead Dredge

    8″ Horizontal Cutterhead Dredge

    • 50,000 USD
    • 260614-DH
    • Location: Virginia

    Dredge Overview For sale: 8″ Horizontal Cutterhead Dredge. This is a home built dredge that’s modeled after a Mud Cat. General Build Year: 1990 Dredge Type: Horizontal Cutter Suction 6-71 Detroit Diesel (unknown hours) Goulds Pump Dredge will require work before being placed into service Does not currently run Last worked 2 years ago Hull…

  • VMI 615 Dredge

    VMI 615 Dredge

    • 110,000 USD
    • 260613-DH
    • Location: Oklahoma

    Dredge Overview For sale: VMI 615 Dredge with less than 100 hours on machine after rebuild. Additionally this dredge comes with 800 +/- ft. of 8″ pipe (20′ sticks) with floats and an additional 15 pieces of 10′ of 8″ flexible tubing. Common dredging applications include pond, marina, and lake maintenance. Full hydraulic oil has…

  • 2018 Ellicott 370-30 Dragon Cutter Suction Dredge

    2018 Ellicott 370-30 Dragon Cutter Suction Dredge

    • 420,000 USD
    • 240922-DB
    • Location: Georgia

    Dredge Overview This 2018 Ellicott 370-30 Dragon Cutter Suction Dredge was completely refurbished in 2018. Applications include deepening rivers, silt removal, mining sand, and coastal small restoration projects. Details Dredge Type: 10″ Cutter Suction Dredge Completely Refurbished in 2018 CAT C15 Engine – Completely Rebuilt in 2025 – Tier 3Still under warranty from CAT Clutch…

  • 4″ Cutterhead Dredge

    4″ Cutterhead Dredge

    • 46,000 USD
    • 250108-DH
    • Location: New York

    4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…

  • 10″ DSC Shark Class Dredge

    10″ DSC Shark Class Dredge

    • 294,250 USD
    • 260416-DH
    • Location: Florida

    Dredge Overview 10″ DSC Shark Class Dredge for sale. This is a complete dredging package including pipe. This is a portable dredge that’s commonly used in mining and construction projects for sand and gravel production. Details Dredge is in good condition and ready to work Only used in fresh water Currently on land Only pumped…

  • Keene 4 inch HP500 Custom Portable Suction Dredge

    Keene 4 inch HP500 Custom Portable Suction Dredge

    • 27,500 USD
    • 260208-DH
    • Location: California

    Dredge Details & Overview This dredge is a portable, high-performance, suction dredge designed for prospecting, gold mining, and more. It comes with a modified high-pressure pump (HP500) that moves significant amounts of material in shallow to medium-depth river environments. Bought new in 2025 and never used 4″ Suction 4″ Discharge 40hp Honda Gravel Pump HP500…

  • 2023 GeoForm Dino 6 Dredge

    2023 GeoForm Dino 6 Dredge

    • 215,000 CAD
    • 260205-DH
    • Location: Canada

    Dredge Overview 2023 GeoForm Dino 6 Dredge for sale in Canada. This dredge is used for cleaning sediment and sludge and from marinas, lagoons, and ponds. Year Built: 2023 Dredge Type: Horizontal Cutter Suction / Auger Characteristics Only 680 engine hrs Bought new in 2023 Dredge has no deficiencies and it’s ready to work Included…

  • 12″ Electric Cutter Section Dredge

    12″ Electric Cutter Section Dredge

    • 150,000 USD
    • 260123-DH
    • Location: Arkansas

    Dredge Info 12″ Electric Cutter Section Dredge for sale (Very Motivated Seller). Dredge is located in Arkansas. The dredge was purchased at auction in 2024 and has been sitting since then. It was in operating condition at that point in time. Seller is unsure on make, model, age, or hours. Commonly used in dredging operations…

  • LWT Pit Hog Electric Auger Dredge (BCV-4)

    LWT Pit Hog Electric Auger Dredge (BCV-4)

    • 33,000 USD
    • 200726-DH
    • Location: California

    Dredge Details LWT Pit Hog Remote Controlled Electric Dredge was purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′…

  • LWT Pit Hog Electric Dredge (BCV-5)

    LWT Pit Hog Electric Dredge (BCV-5)

    • 33,000 USD
    • 200727-DH
    • Location: California

    Dredge Details This LWT Pit Hog Remote Controlled Dredge had been purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is…

  • Ellicott 370 Cutter Suction Dredge

    Ellicott 370 Cutter Suction Dredge

    • 397,500 USD
    • 251107-DH
    • Location: Mexico

    Dredge Info 1990 Ellicott 370 Dragon Series Cutter Suction Dredge for sale. It currently has 8,500 operating hours from 2019 to the present.​ Suction pump is nearly new Entire flotation has recently been replaced Motor has been recently overhauled Includes 500 meters of discharge pipe The dredge is in good working order, as the suction…

  • 250 mm Cutter Suction Dredge

    250 mm Cutter Suction Dredge

    • 1,300,000 EUR
    • 250906-DH
    • Location: Greenland

    Dredge Overview New cutter suction dredger CSD250 type, built in 2024. The dredger has been used for silt. The weight is about 32 tonnes and can easily be lifted on deck on a RAL container vessel. She has about 1200 running hours. Also has 800 m of HPDE hose, 100 m of rubber hose, and…

  • 450 mm IHC-Beaver King Cutter Suction Dredger

    450 mm IHC-Beaver King Cutter Suction Dredger

    • 1,500,000 USD
    • 250609-DH
    • Location: Iceland

    Dredge Info 450 mm (18″) IHC Beaver King Cutter Suction Dredger, Built in 1974 in Holland now available for sale. Dredge Overview & Features: Location: Iceland Manufacturer: IHC Year Built: 1974 Rebuilt: 1976 and 1988​ Maintenance-work and classification inspection: 2007-2008​ Icelandic Maritime Administration certificate: to 3.3.2009 Dimensions: 21,5×7,08×1,8 m Draft loaded: 1 m Suction depth…

  • Rotomite-6000 Self-propelled Dredge

    Rotomite-6000 Self-propelled Dredge

    • 315,650 USD
    • 250606-DH
    • Location: New York

    Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 by SRS Crisafulli is self-propelled dredge that gives you unparalleled control and…

  • VMI MD-815 200 mm Horizontal Mini Dredge

    VMI MD-815 200 mm Horizontal Mini Dredge

    • 185,000 USD
    • 250603-DH
    • Location: Indiana

    Dredge Overview 2016 VMI MD-815 200 mm (8″) Horizontal Mini Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster…