Hydraulic Dredgers

The Rotomite 6000 dredger is easily truck transported and can be used in a wide range of dredging operations from municipal and industrial applications to conservation projects. Quick Overview One owner dredge Articulating cutterhead to keep the cutting teeth at right angles to the face of the dredged material The hydraulic thruster on the Rotomite…

4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…

6 inch horizontal cutterhead dredge with John Deere 163 HP Turbo diesel engine. The dredge is fully operational in good working order. Location: Alabama Dimensions & Info Length: 30 ft. Width: 10 ft. Great running condition with Joy stick paddle wheel propulsion Floatation in compartments. Will not sink 8 inch discharge HDPE pipe available also…

This Mudcat 115D was built in 2020 and has only 1000 hours. Everything works as it should and it is a great dredge. Located in the State of Louisiana General Information   Length: 33 ft.   Width: 8 ft. 6 in.   Draft: 22.5 in.   Weight: 16,250 lbs   Year Built: 2020 / USA…

Remote controlled dredge with horizontal auger. Operates in a cable environment and can be partially or fully automated. The FLUMP (floating lagoon pumper) are simple to operate, and easy to transport. The dredge operator isn’t exposed to potentially hazardous dredged materials. Remote control is user friendly and works in rain. Pontoons are 4.27 m (14-ft).…

This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…

Location: Canada Principal CharacteristicsNew Hydraulic pumpRebuilt Engine 5.9 CumminsRebuilt dredging pump 10″Stainless Steal Ponton All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice

1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA

Built in 1992 with dual hydraulic pump drive – direct from engine. Dredging debt is 15 ft. Cutter diameter is 16 in. with a width of 8 ft. 6 in. Pump suction and discharge diameters are 4 in. Pump capacity is variable to 1000 GPM @ 130’ Head (Water @ 68 degrees F) @1750 RPM.…

Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with suction of…

LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…

The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…

Built in 1999 with only 1,700 working hours. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and marina dredging projects.…

LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…

Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…

Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of…

This Mud Cat dredge is ideal for most horizontal auger dredge applications, including agricultural and industrial ponds, marina maintenance, canals, etc. The dredger is powered by a Detroit Diesel 6-71 RC/model 6030N) with 175 hp @1800 RPM. It has a dredging depth of 15-ft. Comes with 250-ft of 10″ fixed HDPE pipe. Location: State of…

One-truck transportable hydraulic dredge features IMS’s patented Starwheel® drive self-propulsion system eliminating the need for cables or spuds. The 5012 LP is ideal for lake, canal, and river dredging projects. Built in 1997 the dredger has 4,387 working hours. Powered by a Cummins Diesel engine with 250 hp. Propulsion is by Starwheel Drive self-propulsion. Additional…