-
IMS Versi-Dredge 4010
Dredge Overview For sale: IMS Versi-Dredge 4010 located in Iowa. Discharge diameter is 10 inches (254 mm). This dredge was only used in fresh water. The vessel is currently working now but can be inspected anytime. Details Year Built: 1989 Dredge Type: Hydraulic Horizontal Cutterhead Dredge Hours: 5,000 Dimensions & Characteristics Length: 31′ Width: 8’6″…
-
Trailing Suction Hopper Dredger (1300 CY)
Dredge Overview For sale, Trailing Suction Hopper Dredger (TSHD) with a hopper capacity of 1,300 cubic yards (994 cubic meters). There was flooding and the generators that run the crew quarters and wheel house are not operational. Bottom Dump and Bow Discharge Capability with Max effective dredging depth approximately 1.651 m. General Year Built: 1980…
-
4″ Cutterhead Dredge
4″ shop-built cutterhead dredge. Built in Wisconsin. Was properly stored but has been sitting since 2006. May require some work. Location: New York Dimensions & Info Cutterhead dredge width: 4″ x 6″ Lightning pump and GM 3-71 power Hull measures: 20′ x 8′ x 2’8″ Draft: 16″ Ladder length: 21’6″ Hydraulic swing and ladder winches…
-
Keene 4 inch HP500 Custom Portable Suction Dredge
Dredge Details & Overview This dredge is a portable, high-performance, suction dredge designed for prospecting, gold mining, and more. It comes with a modified high-pressure pump (HP500) that moves significant amounts of material in shallow to medium-depth river environments. Bought new in 2025 and never used 4″ Suction 4″ Discharge 40hp Honda Gravel Pump HP500…
-
2023 GeoForm Dino 6 Dredge
Dredge Overview 2023 GeoForm Dino 6 Dredge for sale in Canada. This dredge is used for cleaning sediment and sludge and from marinas, lagoons, and ponds. Year Built: 2023 Dredge Type: Horizontal Cutter Suction / Auger Characteristics Only 680 engine hrs Bought new in 2023 Dredge has no deficiencies and it’s ready to work Included…
-
LWT Pit Hog Electric Auger Dredge (BCV-4)
Dredge Details LWT Pit Hog Remote Controlled Electric Dredge was purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′…
-
LWT Pit Hog Electric Dredge (BCV-5)
Dredge Details This LWT Pit Hog Remote Controlled Dredge had been purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is…
-
VMI 8″ Horizontal Cutter Head Dredge
Dredge Overview VMI MDE-615 8-Inch Cutter head dredge built in 2007 and in excellent condition. Has ICS controller. This dredge is a cable-driven cutter suction dredge, that’s easily transportable. Dredging applications include marinas, lakes, ponds, and lagoons. Features include a full-width cutterhead and recessed impeller pump for efficient sediment removal. Additional pictures available here: 251105-DH…
-
Refurbished Suction Dredger
Dredger Overview Suction dredger for sale in Spain. Refurbished in 2013. More than 90% of the original vessel has been renewed in different phases. In 2022-2023 current owners changed a lot of steel plates, 50% of the hopper floor. A new dismountable deck cover was added, new dredging circuit, new hydraulic engine for the pump…
-
Rotomite-6000 Self-propelled Dredge
Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 by SRS Crisafulli is self-propelled dredge that gives you unparalleled control and…
-
VMI MD-815 200 mm Horizontal Mini Dredge
Dredge Overview 2016 VMI MD-815 200 mm (8″) Horizontal Mini Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster…
-
IMS 5012 HP Versi-Dredge
Dredge Details & Overview Built in 2007, the IMS 5012 HP Versi-Dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal…
-
Series 1870 Dragon® Cutterhead Dredge
Available for sale, Ellicott Series 1870 Dragon® cutterhead dredge. This dredger is a medium to large portable dredge that has a shallow dredging feature enabling highly effective excavation at 5 ft. Location: Mexico Quick Overview Dimensions & Info Build Year: 2012 Length Overall: 82 ft. (25 m) Hull Length: 27 ft. (8,23…
-
Rotomite 6000 Dredge
The Rotomite 6000 dredger is easily truck transported and can be used in a wide range of dredging operations from municipal and industrial applications to conservation projects. Quick Overview One owner dredge Articulating cutterhead to keep the cutting teeth at right angles to the face of the dredged material The hydraulic thruster on the Rotomite…
-
152.4 mm (6″) Horizontal Cutterhead Dredge
152.4 mm (6 inch) horizontal cutterhead dredge with John Deere 163 HP Turbo diesel engine. The dredge is fully operational in good working order. Dimensions & Info Length: 30 ft. Width: 10 ft. Great running condition with Joy stick paddle wheel propulsion Floatation in compartments. Will not sink 8 inch discharge HDPE pipe available also…
-
18″ x 18″ Custom Shark Dredge
This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…
-
10-inch IMS 4000 Horizontal Dredge
This 10-inch IMS 4000 Horizontal Dredge was built in 1986. It has 4 24″ x 36″ x 96″ side mount pontoons for stability and the main pontoons have rectangular frame work for skid purposes. It has a Cummins 3.9L 116 hp engine and the dredge is propelled with a spool winch. Located in The State…
-
10″ Horizontal Auger Dredge
Location: Canada Principal Characteristics New Hydraulic pump Rebuilt Engine 5.9 Cummins Rebuilt dredging pump 10″ Stainless Steal Ponton Our inventory changes weekly. If you don’t see what you’re looking for, please call us at +1 (225) 301-2873 or email us.
