-
Damen 250 Submersible Pump
This Damen DOP250 Submersible Pump is a compact pump directly powered by a hydraulic motor, mounted in a protective casing. The robust casing can be fitted out with a large array of suction heads, which results in a versatile dredging tool fit for a broad range of tasks. Pumps are designed to be user friendly…
-
10-inch Ellicott 370 Pump w/ Reducer Complete
This 10-inch Ellicott 370 Pump was built in 2009. It is a complete pump and transmission (bearing housing and shaft). The the impeller and shell have about 60% life remaining. The dry end has been refurbished, and is in good condition. The transmission has new bearings, seals and a cooler. Location: Georgia Principal Dimensions and…
-
27 x 24 x 68-inch Booster Pump with twin Cat 399 power
This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…
-
6 x 8-inch Booster Pump
This is a 6 x 8-inch Booster Pump with a Detroit Inline 6 diesel engine. Located in the state of Louisiana, USA Principal Dimensions and Characteristics Type: Booster Pump Make/Model: Furukawa Slurry / LFK004 pump Discharge Diameter: 152.4 mm 6 inches Suction Diameter: 203.2 mm 8 inches Weight: 10,000…
-
Not Available – 10-inch Booster Pump
This 10-inch (254mm), 600 hp Booster Pump. This booster pump is skid mounted and has 2,000 hours. The engine and gearbox are in good condition. Pump is in very good condition. Location: Portugal Pump Dimensions and Characteristics Year Built: 2015 Transportation dimensions Length: 6 m x 2 19.7-ft x 2 …
-
Sold: Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
SOLD: 14-inch GIW Pump Impeller
Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands
-
SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-
SOLD – 10 x 8-inch Booster Pump w/Mack Engine
This listing is for a Lightning XL booster pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder…
-
SOLD: 6-inch Booster Pump with 226 hp Perkins Engine NEW
This is a 6-inch Booster Pump with 226 hp Perkins Engine NEW with only two (2) operating hours. Located in Europe Principal Dimensions and Characteristics Pump Engine: Make/Model: Perkins / 1106-66TA, 2013 Power: 168 kW 226 hp Pump: Make/Model: Senwatec suction pump Pump Performance up…
-
Not Available – 16-inch Maddox Booster Pump w/ Detroit 16V92TI Prime Mover
This is a 16 x 16-inch Maddox Booster Pump with a 16V92TI Detroit Diesel engine, driven through a Falk Gear Box. Booster is in good condition. Location: state of Florida, USA Pump Dimensions and Characteristics Type: Booster Pump Make/Model: Maddox / 16X16X36 Discharge Diameter: 406.4 mm 16 inches Suction Diameter: 406.4…
-
Sold: Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in 0.94…
-
Sold: 10-inch Booster Pump with Automation Package
The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…
-
SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
SOLD: 12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…
-
Not Available: 10-inch Submersible Pump with Agitators Toyo DP-150B
Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA Dimensions and Characteristics Model: DP-150B-3D1 Outlet: 254 mm 10-in Capacity: 720 m3/h 942 yd3/h…
-
Not Available: 12-inch Submersible Pump with Agitators Dragflow HY 300B
Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6…
-
Not Available: 300 mm (12-inch) Submersible Pump, Damen DOP 3025
This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…
