-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
Under Charter – 200 ton Crane Barge w/ American 9520 mounted crane
All welded deck barge with raked bow. Barge has an American 9520 – Deck mounted crane with capacity of 200 Ton. Boom length is 180-ft. The barge has a length of 250.1-ft, breadth of 60.1-ft and depth of 11.6-ft. The draft is 3.0-ft and GT is 1694.Location: State of New Jersey, USA …
-
SOLD: 1485 m3 Split Hopper Barge
This 2220 ton Split Hooper Barge was built in 1987 in Yugoslavia. Its Class Society is Phoenix Shipping, Flag Comoros. This Split Barge comes from a conversion project from dry cargo. Reconstruction in 2018 and last dry docked in January 2019. Accommodates five persons. Additional Information Summer Load Draft (extreme) 4,169 metres Displacement at Load…
-
SOLD: 400m3 Split Hopper Barge
Built in 1983 in Germany, the hopper barge has a classification of Russian River Register (O-PR 2.0 (Ice 20)). The hopper has a capacity of 400m3 with a load of 850t. The barge is powered by 2 x 220 kW diesel engines. Loaded speed is 4 knots and empty speed is 10 knots. The barge…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 400 m3 Self-Propelled Split Hopper Barge
Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
SOLD: Self Propelled Floating Revolving Crane Demag 410e
Built in 1966 in Germany, the barge was rebuilt in 1980. Self propelled crane barge has a new class for European inland water. The crane is a Demag 410 hoisting/dredging crane. On the stern deck, there is a 16 tons A-frame for 16 tons hydraulic hoisting. The barge is powered by 2 Daimler Benz Germany…
-
SOLD: 1,300 m3 Split Hopper Barge, Reinforced for Rock
Built in 2010, the barge hopper is 35mm thick and can be used for rock & stone. The main engine is 2 NINGDONG with 2 x 473 hp. Maximum speed is 11 knots. The barge length is 64.85 m, beam is 13.2 m and depth is 4.6 m. Location: Malaysia General Built: 2010 Class Society…
-
SOLD: 90-tonne Self Propelled Crane Barge
This 90-tonne Self Propelled Crane Barge was built in 1982 in Japan and was reclassed in2012 in Thailand and was modernized in 2015 in Russia. Its Classification Society and Notation is RMRS (Russian Maritime Register of Shipping), (KM) R2 Crane Ship. Its last Dry Docking was in November, 2015, the next Dry Docking is due…
-
SOLD: 160-tonne Bottom Dumping Self-Propelled Hopper Barge
This Barge was built in 1963 at the Ulmer Schiffs-und Bootswerft, HaBmersheim Shipyard. This barge is in good functioning condition, the owner installed larger tanks of 728 liters in 2006. Located in Germany “As Is, Where Is” Principal Dimensions and Characteristics Length Over All: 28.00 m 92 feet Width: 5.20 m 17 feet…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-
Not Available – 30,000 TLC Floating Dock
Vessel Info Floating dry dock with 30,000 t lifting capacity for sale. Vessel Information Built: July 2014 Flag: China Class: CCS (Domestic, Non-IACS) Length: 235.96 m GT: 37,733 tons Lifting capacity: 30,000 tons Inner clear width: 46.80 m Dock wall width: 4.50 m Dock depth: 22.40 m Dock wall length: 201.60 m Moulded width (width…
-
SOLD: 110 ft. Steel Barge with Crawler Crane
Type: Crane Barge Material: Steel Size: 110′ X 30′ X 7′ Crane: 5299 Am Crawler Crane Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.
-
SOLD: 300 Man Accommodation, Pipelay Vessel & Crane Barge
Built in 2012, this vessel was purpose built to support a variety of offshore activities, including. Pipelay Activities Shallow Draft Operations Conventional market and hook-up projects The vessel provides accommodation capabilities exceeding 300 berths Construction and IMR (Inspection, Maintenance, and Repair) support services Quick Overview LOA: 113m Main Crane: 250t Deck Space: 2500m2 8 Point…
-
SOLD: 150-tonne Self-Propelled Revolving Crane Barge
The floating crane can lift loads up to 150 mt, transport them on water and precisely position them. The crane is more flexible than mobile or port cranes in the handling of heavy and/or oversized cargo. Due to the floating cranes, waterside operations do not stain the quay. On the cranes’ cargo, loads can be stowed and transported over longer distances before safely being offloaded…
-
SOLD: 357 m3 Non-Self-Propelled Bottom Dumping Hopper Barge
For sale or charter. Built in 1980 in Portugal. The barge has a length of 44.89 m and a breadth of 8.16 m. DWT is 826 tonnes. Location: Northern Europe General Built: 1980 / Portugal Hull Material: steel Principal Dimensions and Characteristics Length Over All: 44.89 m 147.3-ft Breadth: 8.16 m 26.77-ft DWT: 826 tonnes…
-
Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
