-
Updated Price – 16-inch Cutter Suction Dredge (CSD) IHC Beaver 40
IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…
-
Sinaloa Cutter Suction Dredge
Built in 1980 in the USA. Location: Nicaragua General Information Built By: AMMCO (USA) Year Built: 1980 Flag: Mexico Classification: No Dimensions and Characteristics Length Over All: 35.71 m Beam: 18 m Depth Molded: 1.80 m Dredge Max Dredging Depth: 13.35 m Min Dredging Depth: 2…
-
8-inch Bucket Wheeler Cutter Dredger
Neumann built 8″ Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and the hydraulic…
-
2,800 bhp Twin Screw Ocean Going Towing Tug
This 2,800 bhp, 29 ton Twin Screw Ocean Going Towing Tug has 2 x Mitsubishi S12R-MPTK. The tug travels at an economical speed of 10 knots and a maximum speed of 12 knots. Endurance is approximately 35 days and the tug has accommodates 17 persons. All navigation systems are in good condition. The latest use…
-
1,000 m3 Non-Self-Propelled Split Hopper Barge
This listing is for a 1,000 m3 Non-Self-Propelled Split Hopper Barge that was built in Japan in 2001. Flag: Korea / KST, Coastal Location: Korea Dimensions and Characteristics Year Built: 2001 Length Over All: 48 m 158 feet Length: 46.10 m 151 feet Beam: 13 m 43 feet Depth: 4.10…
-
122 m (400 feet) Ballastable Barge w/ 15 t/m3 Deck Load Rating
This 122 m (400 feet) Ballastable Barge w/ 15 t/m3 Deck Load Rating was built in 1969 and its Classification Society and Notation is BV (Bureau Veritas), * 1A1 Ballastable Barge. Located in Singapore Dimensions and Characteristics Year Built: 1969 Classification Society/Notation: BV (Bureau Veritas), * 1A1 Ballastable Barge Length Over All…
-
400 ton Floating Crane with Notch Tug
This 400-ton Floating Crane with Notch Tug was built in 1994 in Japan. Located in Japan “As Is, Where Is” Basis Dimensions and Characteristics Barge Year Built: 1994 Length Over All: 63.00 m 207 feet Beam: 24.00 m 79 feet Depth: 4.00 m 13 feet Draft: 3.00 m 10…
-
86 m DWT 3000-tonnes Self-propelled Deck Barge
This 86 m DWT 3000-tonnes Self-propelled Deck Barge was built in August, 2013 at the Yichangbal Shipyard in China. It’s Classification Society and Notation is KST (Korea Ship Safety Technology Authority), Navigation Area is Coastal. Located in Korea Principal Dimensions and Characteristics Year Built: 2013 Classification Society/Notation: KST (Korea Ship Safety Technology…
-
9-tonne Capacity Truckable Jack Up Barge
This is a new, built to order unit, however one is usually available for prompt delivery from stock. The unit is comprised of styrofoam blocks for flotation in a steel frame. It can be shipped in 4 standard ISO containers. The barge is well suited for soil for investigation. Located in the Far East Principal Dimensions and…
-
250 tonne Floating Crane
This 250-tonne Floating Crane was built in 1983 in Japan. Located in Japan Dimensions and Characteristics Barge Year Built: 1983 Length Over All: 65 m 213 feet Beam: 25 m 82 feet Depth: 5 m 16 feet Draft (Full Load): 3.04 m 10 feet Draft (Empty): 1.8 m 6…
-
38.6 m (126-feet) Self-Propelled Deck Barge (LCT)
This 38.6 m (126-feet) Self-Propelled Deck Barge (LCT) was built in December, 1987 in Korea. It’s Classification Society is KST (Korean Coastal). Bilge pump and Oil/Water separator fitted. Deck plate was renewed in 2002. Flag: Korea Located in Korea Dimensions and Characteristics Length Over All: 38.06 m 126 feet Beam: 8.5 m 28…
-
Sold – Mitsubishi 2000 Kva Genset
Mitsubishi 2000 Kva (1590 kw @ 1500 rpm) Model S16R-PTA. Engine hours 200 hours. Manufactured in 2016, 4 units available. The Mitsubishi Diesel Engine range is designed to provide premium levels of performance, durability and reliability with ease of maintenance. Below are some of the benefits, features and advantages. Price per unit. Unused/ slightly used…
-
Sold – Mitsubishi 1100 Kva Genset
Mitsubishi 1100 Kva (883 kw @ 1500 rpm) Model S12H -PTA. Engine hours 50 hours. Manufactured 2017. The Mitsubishi Diesel Engine range is designed to provide premium levels of performance, durability and reliability with ease of maintenance. Unused/ slightly used Location: Vietnam General Information Make/Model: Mitsubishi Model: S12H-PTA Mfg Year: 2017 Engine Type: 4-stroke diesel…
-
Not Available – 80-tonne Road Transportable Jack Up Barge
This 80-tonne Road Transportable Jack Up Barge is under currently construction (June, 2016), and will require another 3 to 4 months to complete. All of the main works are complete, just needs the jacking system installed. Located in Malaysia Principal Dimensions and Characteristics Year of Build: 2016 Certification: BV (Bureau Veritas) Hull Attestation…
-
Not Available – 4,000 m3 Bottom Dumping Hopper Barge
This 4,000 m3 Bottom Dumping Hopper Barge was built in January, 2001 in Japan. It’s Classification Society / Notation is KST (Korea Ship Safety Technology Authority), Navigation Area is Great Coastal. Its last S.S. was in October, 2013 and its last I. S. was passed in May, 2011. This barge can be used for both…
-
Sold – IMS 7012 HP Versi-Dredge®
The IMS Model 7012 HP Versi-Dredge® is a hydraulic dredge that’s self-propelled, and truck transportable. Price includes all spare parts. Location: Malaysia Ideal for; Dredging ports Lakes Canals Rivers Beach restorations Quick Overview Manufacturer: IMS Dredge Year Built: 2018 Optional equipment Dredge Automation GPS Dredging System Production Instrumentation Swing winches for conventional operations Traveling spud…
-
Not Available: 27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
SOLD: 3,200 bhp Twin Screw Ocean Going Towing Tug
The tug has accommodations for 15 persons and an endurance of 26 days. With 2 x Cummins KTA 50M2, the tug has combined 3,200 bhp. All navigation systems are in good condition. The latest use of this boat was 2.5 years ago. The tug is ready to go to work. GMDSS area – A1. SOLD…
