-
Sold – 10-inch (250 mm) Wolverine Dredge
The hull is composed of three compartments. The hull sides and deck is constructed from 10 gauge plate (3.57 mm). The bottom of the hull is constructed from 3/16” plate (4.7 mm). The ladder is constructed of 3”x3”x3/16” (76 mm x 76 mm x 4.7 mm) angle iron with 7 gauge (4.55 mm) metal plate…
-
SOLD: 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump
Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…
-
SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant
The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…
-
SOLD: 12-inch Cutter Suction Dredge
This 12-inch (305 mm) Cutter Suction Dredge built by Twinkle in 2002. The dredge is transportable with side pontoons removable. Twinkle Co rotary cutter baskets are designed and built for sand and gravel dredge mining. The cylindrical pontoons are inherently strong, which requires less steel per cubic foot of displacement. Location: State of Illinois, USA…
-
Sold – 254 mm (10-inch) Custom Dredge Works CSD
Dredge Overview This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Dimensions and Characteristics Length Over All 89-feet Beam: 17-feet Depth:: 4.5-feet Draft: 0.82 …
-
Not Available: Ellicott 1270 – 18-inch Cutter Suction Dredge (CSD)
The Ellicott Series 1270 built in 2018 is a non-self-propelled, transportable, hydraulic pipeline, cutterhead dredge. Its prime mover consists of a diesel driven centrifugal dredge pump and a diesel driven hydraulic system which powers the cutter, ladder lifting cylinders, and swing and spud winches. The dredge is fully operational. Service records available. 2 cutter heads…
-
Not Available: 8-inch Sand and Gravel Dredger
This 8-inch Sand and Gravel Dredger comes with approx. 300 feet of 8 inch pipe. Located in the state of Michigan, USA Principal Dimensions and Characteristics Main Engine Make/Model: Caterpillar / 3306 (diesel with a turbo) Power: 224 kW 300 hp Discharge & Pipe Discharge Diameter: 203.2 mm 8 inches Pipe Size/length (approx.): 203.2…
-
Sold – 406.4 mm (16-inch) Cutter Suction Dredger
Dredge Overview This 16-inch Cutter Suction Dredger was built in 2010 and can be purchased with or without a 16″ booster pump. The Dredge and booster barge require trucks for transportation, including one oversize load. It fully meets California environmental regulations and the dredge pump is in excellent condition. Only a few hundred hours on…
-
SOLD: Ellicott 370 Dragon Hydraulic Cutter Suction Dredge
2002 model. Built longer than full length side tanks to extend the hull to 48′ LOA and 21′ WOA, they connect to the existing hull with Ellicott OEM hook and socket connections at the bottom similar to the 670 model and bolted connections above deck. The perimeter of the deck is fitted with 1.5″ speed…
-
SOLD – 20 inch Ellicott Dredge 1870
Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…
