-
109.8 m Bulk Carrier / Vessel
This ship is a bulk carrier with a stern model, vertical bow column, single engine, single propeller, single rudder, and diesel engine propulsion. The ship has a first floor, a poop and a three‑story deckhouse. The cargo hold area is a double‑bottom double‑hull longitudinal frame structure, and the bow and stern tip cabins are single‑bottomed…
-
Floating Production and Offloading (FPO) Barge
First of its kind prototype spill containment system designed to support offshore oil exploration activities in Arctic waters. To request additional documentation and specs please contact us Oil Spill Containment System Overview The Arctic Containment System (ACS), was designed by Superior Energy Services-Marine Technical Services, (SES-MTS) to contain and recover uncontrolled oil and gas subsea…
-
200-tonne Ravestein Jack Up Barge
The platform consists of multiple pontoons (16 units), each with outer measurements of a standard 40’ sea-container. The two outer pontoons are each with two legs wells and connections lugs for the hydraulic lifting system. The lifting system mainly consists of four legs, four removable hydraulic lifting systems, a power system and a control panel.…
-
2023 LCT Cargo Vessel, Self-Propelled Sea Going
Built in 2023 this sea going, LCT cargo vessel / barge can be used for containers, heavy vehicles, heavy equipment, coal, bauxite, stone, general cargo, and more. Location: China Built March 2023 Hull material: Steel Flag: China Class Society and Notation: China ZC Price: $3,000,000 General Information Gross Tonnage: 2272 Net Tonnage: 1272…
-
10 x 20 Service Barge
Barge Details & Characteristics Dimensions: 10′ x 20′ Power: Yamaha F150 Outboard Equipment and Other: Gantry crane, Single Pilot Station, Tool Boxes Our barge inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.
-
For Charter – 31.2 m x 16.7 m x 2.4 m Jack-Up Barge
For Charter Only The Jack-Up barge has a deck load capacity of 570T – 3T/m2 and a maximum water depth of 28 m (92-ft). Spud lifting speed is 0.4 m/min. The barge was built in 1990 and has had several conversions since. Class Society and Notation is BV Self Elevating Coastal Waters. Location: Europe General…
-
300-tonne Stiff Leg Derrick
The 300-tonne Stiff Leg Derrick was built in 2005 by the PT.ASL Shipyard in Indonesia. Located in Hong Kong Principal Dimensions and Characteristics Year Built: 2005 Length Over All: 52.67 m 173 feet Molded Beam: 20.73 m 68 feet Molded Depth: 3.05 m 10 feet GRT/NRT: 892/267 Generator Make/Model:…
-
Twin 290-man Accommodations Barges
Year built 2009. The barge is 76.16 m (250-ft) in length and has a beam of 17.76 m (58-ft). Maximum draft is 3.0 m (9.84-ft). It has a fresh water capacity of 170 m3, fuel oil capacity of 80 m3 and sewage waste capacity of 580 m3. Equipment include (2) 800 kW CAT generator, (2)…
-
60 inch Pipe Lay Barge with DP and Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
Sold – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-
Sold – 30′ Raked Bow Work Barge
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Sold – 80-tonne Road Transportable Jack Up Barge
This 80-tonne Road Transportable Jack Up Barge is under currently construction (June, 2016), and will require another 3 to 4 months to complete. All of the main works are complete, just needs the jacking system installed. Located in Malaysia Principal Dimensions and Characteristics Year of Build: 2016 Certification: BV (Bureau Veritas) Hull Attestation…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
