-
65 m, 1339 DWT Twin Screw Ro_Ro
Built in 2004 in Istanbul. The self-propelled barge has an over all length of 66.5 m, breadth of 64.63 m and depth of 16.6 m. GT is 975 and NT is 436. The barge is powered by 2 Baudouin engines with combined 2958 hp. Fuel capacity is 71.58 m3 and daily consumption is 11.32 m3.…
-
2,200-tonne Floating A-frame Crane Luffing Type
Built in 2014 in Korea, the floating crane barge is registered in Panama. It has a GT of 9205 Ton and NT of 2361 Ton. The max lifting capacity if 2,200 Ton with 2 JIB Luffing Type. Lift Height from deck is 87 m with a boom angle of 65 degrees.Outreach from bow is 29.3…
-
12-person High Speed Crew Boat
Aluminum hull, 1260 bhp high speed crew boat was built in 2012 in Netherlands. It has around 6500 running hours. Class is BV Fast Utility Sea Area 3. Main engines are 2 x Caterpillar C7 and main propulsion is 2x Ultra jet 340. Cruising speed is reported as 21 knots. Fuel capacity is 0.87 m3…
-
1,300-Tonne, 150-man Lift Barge with DP2
The platform is defined as a self-propelled Jack-up that is designed as according to a GustoMSC type NG-2500X which mainly designated for operation in worldwide ocean environments with sea water depths up to 70 m at all specified weather and the sea conditions stated in specification at that region. The unit is intended to be…
-
2,100 hp Single Screw Ocean Going Tug
Built in 1987 in Italy, this tug is recently out of drydock July 2020 with an IACS class (RINA). It is powered by a Wartsila F38A 1 x 1550KW – 840 RPM engine with controllable pitch propeller in Kort steering nozzle. Bollard Pull is 39 tons. Maximum speed is 13 knots and cruising speed is…
-
28 m x 16.2 m x 3 m Heavy Spud Barge
This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…
-
1870 kW (2508 hp) Twin Screw ASD Harbor Tug
Class Society and Notation of Croatian Register of Shipping 90A2 4 (coastal service) Tug. The tug is 32.11 m in length and has a beam of 8.8 m. It is powered by 2×Niigata (6L25CXE) engines. Main propulsions is ASD. Bollard pull ahead is 40 MT and astern is 35 MT. Flag: Liberia Location: Black Sea …
-
1,350 m3 NEW BUILD Self Propelled Hopper Barge
Bottom door dump barge is 90% complete. Estimate 2 months to complete upon purchase agreement. Barge has 16 bottom doors, 8 cells. Hydraulic system opens doors. The barge is powered by 2 engines each with 800 hp (597 kW) and 2 Schottlet propellers. The barge has accommodations of 5 x cabins (1 Master’s and 4…
-
4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
2.5 m3 Excavator Dredger on Jack-Up Barge
This listing is for a 2.5 m3 Excavator Dredger on Jack-Up Barge that was built in 2013. Location: Turkey Principal Dimensions and Characteristics Year Built: 2013 Length: 27.50 m 90 feet Beam: 15 m 49 feet Draft: 1 m 3.3 feet Gross Tonnage: 157 tons Spuds (4): …
-
90-tonne Self Propelled Crane Barge
his 90-tonne Self Propelled Crane Barge was built in 1982 in Japan and was reclassed in2012 in Thailand and was modernized in 2015 in Russia. Its Classification Society and Notation is RMRS (Russian Maritime Register of Shipping), (KM) R2 Crane Ship. Its last Dry Docking was in November, 2015, the next Dry Docking is due…
-
199-man Accommodation Work Barge w/ 150-tonne Crane
This 199-man Accommodation Work Barge w/ 150-tonne Crane was built in 1964 and was rebuilt in 2009, and its Classification Society and Notation is ABS (American Bureau of Shipping), (IACS Class), Accommodation Barge. In 2009, Major dry-dock modification and replacement of 300 tons steel was carried out under ABS class and issued with RB 2009…
-
1,604 hp Twin Screw Tug for Charter
This 1,604 hp Twin Screw Tug was built in 1988 in the USSR and its Classification Society is RMRS (Russian Maritime Register of Shipping), KM*L1 R2RSN AUT2 Tug. It was last Dry Docked in June, 2013 and the next is due in December, 2016 and the next Special Survey is due in November, 2019. Flag:…
-
500 hp Twin Screw Anchor Handling Pusher Tug
This 500 hp Twin Screw Anchor Handling Pusher Tug was built in 1977 in Japan and was rebuilt in 2005. Its Classification Society is Attestation (Navispec). Flag: UAE Located in the Persian Gulf Principal Dimensions and Characteristics Year Built/Rebuilt: 1977/2005 Classification Society: Attestation (Navispec) Length Over All: 14.91 m 49 feet…
-
4 Point Mooring 30 men Accommodation Working Barge
This 4 Point Mooring 30 men Accommodation Working Barge was built in 2011 and its Classification Society is BV (Bureau Veritas). The next Dry Docking and Special Survey are due in October, 2016. Flag: Panama Located in the Middle East “As Is, Where Is” Basis Principal Dimensions and Characteristics Year Built: 2011 …
-
6,000 hp Ocean Tug
This Tug was built in 1976 in Brememhaven, Germany and its Classification Society is BV (Bureau Veritas). The Class is presently suspended because the last Special Survey has not been done in about one year, but it can be reinstated by the buyer after passing the Special Survey at the buyers cost. Located in the…
-
26 inch IHC Cutter Suction Dredger
This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. Its Classification Society is Bureau Veritas, the vessel had a General condition Survey of Non-Classed Vessel (For Navigation License Purpose) on April 16, 2009. This vessel is available for inspection and delivery.…
