-
Keene 4 inch HP500 Custom Portable Suction Dredge
Dredge Details & Overview This dredge is a portable, high-performance, suction dredge designed for prospecting, gold mining, and more. It comes with a modified high-pressure pump (HP500) that moves significant amounts of material in shallow to medium-depth river environments. Bought new in 2025 and never used 4″ Suction 4″ Discharge 40hp Honda Gravel Pump HP500…
-
DSC Barracuda 10-inch Swinging Ladder Dredge
Built in 1997 and rebuilt/refurbished in 2012, the swing ladder dredger has an overall length of 64-ft 4-in, a transportation width of 11-ft 10-in and an operating width of 18-ft 6-in. Mean draft is 30-in. Max dredging depth is 18-ft and min is 3-ft. The dredge pump has a suction diameter of 12 inches and…
-
2023 GeoForm Dino 6 Dredge
Dredge Overview 2023 GeoForm Dino 6 Dredge for sale in Canada. This dredge is used for cleaning sediment and sludge and from marinas, lagoons, and ponds. Year Built: 2023 Dredge Type: Horizontal Cutter Suction / Auger Characteristics Only 680 engine hrs Bought new in 2023 Dredge has no deficiencies and it’s ready to work Included…
-
2020 Mud Cat Auger Dredge
Dredge Overview This 2020 Mud Cat MC275D has approximately 6,300 hours of operation and features a one-truck transportable dredging system equipped with both a cable drive system and a heavy-duty dual marine prop drive system for self-propelled dredging. It has a 25 ft max dredging depth, and a nominal capacity of 3,000 GPM (681 m³/hr)…
-
12″ Electric Cutter Section Dredge
Dredge Info 12″ Electric Cutter Section Dredge for sale (Very Motivated Seller). Dredge is located in Arkansas. The dredge was purchased at auction in 2024 and has been sitting since then. It was in operating condition at that point in time. Seller is unsure on make, model, age, or hours. Commonly used in dredging operations…
-
7,047 cbm TSHD For Sale
Dredge Info For sale, Trailing Suction Hopper Dredger (TSHD) with a capacity of 7,047 cbm. Operating water depth of 9-27m, with wind speeds below 13.8m/sec. Wave level below 5, and swell wave level below 3, suitable for operations with wave height below 2m. Unable to operate during typhoons or severe weather conditions with strong winds…
-
DSC Barracuda 254mm (10-inch) Swinging Ladder Dredge
Dredge Info DSC Barracuda Swinging Ladder Dredge for sale. Built in 1990 (Dredging Supply Company). Although the dredge can be used in conventional configuration, it has always been used in Swinging Ladder Mode. 95% of all works were performed in fresh water in the Piedmont Carolinas. She has been maintained and serviced regularly with upgrade…
-
DSC Moray Total Dredge Package
Dredge Overview DSC Moray Total Dredge Package, 8×8 Swinging Ladder or Conventional Dredge. Built in 2009. Included Items 2009 DSC Moray 8×8 Swinging Ladder or Conventional Dredge 8,000 engine hours 8×8 Booster Pump CAT 3306 300hp Metso 8×8 H24HD dredge pump Twin Disc PTO 88 hp single crew Truckable Tug 1,820′ of 8″ SDR 17…
-
LWT Pit Hog Electric Auger Dredge (BCV-4)
Dredge Details LWT Pit Hog Remote Controlled Electric Dredge was purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′…
-
LWT Pit Hog Electric Dredge (BCV-5)
Dredge Details This LWT Pit Hog Remote Controlled Dredge had been purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is…
-
Ellicott 370 Cutter Suction Dredge
Dredge Info 1990 Ellicott 370 Dragon Series Cutter Suction Dredge for sale. It currently has 8,500 operating hours from 2019 to the present. Suction pump is nearly new Entire flotation has recently been replaced Motor has been recently overhauled Includes 500 meters of discharge pipe The dredge is in good working order, as the suction…
-
VMI 8″ Horizontal Cutter Head Dredge
Dredge Overview VMI MDE-615 8-Inch Cutter head dredge built in 2007 and in excellent condition. Has ICS controller. This dredge is a cable-driven cutter suction dredge, that’s easily transportable. Dredging applications include marinas, lakes, ponds, and lagoons. Features include a full-width cutterhead and recessed impeller pump for efficient sediment removal. Additional pictures available here: 251105-DH…
-
250 mm Cutter Suction Dredge
Dredge Overview New cutter suction dredger CSD250 type, built in 2024. The dredger has been used for silt. The weight is about 32 tonnes and can easily be lifted on deck on a RAL container vessel. She has about 1200 running hours. Also has 800 m of HPDE hose, 100 m of rubber hose, and…
-
203.2 mm Submerged Pump Swinging Ladder Dredge
Dredge Overview DSC Moray Class 8″ Submerged Pump Swinging Ladder Dredge available for sale. A 2022 survey has the dredge in good condition with good coatings. Vessel length: 42 ft. Vessel width: 11 ft. Dredging Depth: 17.5 ft. (5.3 m) Dredge Ladder: 20 ft. Discharge: 203.2 mm (8″) Power: 275 hp (205 kW) Cutter Power:…
-
Ellicott 300SL 203.2 mm Swinging Ladder Dredge
Dredge Overview Built in 2009 and purchased new in 2011. Highly portable swing ladder designed to work in narrow channels and small projects. One truck transportable. Maximum dredging depth of 15 ft. and min depth of 2 ft. 4 in. Powered by a 375 hp John Deere Model 9.0L 6090HF070 Turbocharged Diesel Engine. Cutter has…
-
450 mm IHC-Beaver King Cutter Suction Dredger
Dredge Info 450 mm (18″) IHC Beaver King Cutter Suction Dredger, Built in 1974 in Holland now available for sale. Dredge Overview & Features: Location: Iceland Manufacturer: IHC Year Built: 1974 Rebuilt: 1976 and 1988 Maintenance-work and classification inspection: 2007-2008 Icelandic Maritime Administration certificate: to 3.3.2009 Dimensions: 21,5×7,08×1,8 m Draft loaded: 1 m Suction depth…
-
Rotomite-6000 Self-propelled Dredge
Dredge Info Rotomite™ 6000 Self-propelled dredge for sale. It was last used in 2018 to dredge. We had it running again in 2024 to test all the systems out. Replaced the engine with a factory John Deere engine with warranty. The Rotomite™ 6000 by SRS Crisafulli is self-propelled dredge that gives you unparalleled control and…
-
VMI MD-815 200 mm Horizontal Mini Dredge
Dredge Overview 2016 VMI MD-815 200 mm (8″) Horizontal Mini Dredge for sale. Only 3914 hours on it. Purchased new in 2016. Very little wear on the pump. Material pumped was mainly pond muck and organics. Positioning system was installed and maintained by Measutronics, Inc. ** Can be purchased with IMS 8″ x 10″ booster…
