-
Not Available – 10-inch Portable Ellicott Dredge 370-42
This 10-inch Ellicott 370-42 was commissioned in 2017 and has been completely overhauled in July 2020. The dredge has 17,685 operational hours and was operated in a mine tailings reclamation project in the Dominican Republic. The dredge has been well maintained with all C15 engine rebuilds completed by the local authorized Caterpillar dealer. On hard…
-
Not Available – 10-inch Portable Dredge Ellicott 370-33
This 10-inch Cutter Suction Dredge (CSD) Ellicott 370-33 was commissioned in 2012 and has been completely overhauled in 2014, 2016 and 2020. The dredge has 42,094 operational hours and was operated in a mine tailings reclamation project in the Dominican Republic. The dredge has been well maintained with all C15 engine rebuilds completed by the…
-
Sold – 1984 Ellicott 370 Dragon Cutter Suction Dredger
Dredge Info Built in 1984. Rebuilt pump with low hours. Everything works. Cab and controls need to be rebuilt and modernized. Used for dredging marinas, lakes and rivers, channels, canals, sand mining, more. Dredge package also includes 2000′ of flanged 10″ SDR 17 HDPE pipe and 40 – 10″ pipe floats. Location: Northwest, USA Dimensions…
-
Not Available – 10-inch Swinging Ladder Dredge w/ Traveling Spud
This listing is for a 10-inch Swinging Ladder Dredge w/ Traveling Spud that was rebuilt in 2012 and 2016. It has a diesel engine that was also rebuilt in 2016, the Traveling Spud is hydraulically operated and it comes with the following additional equipment: 3,000-feet of 12-inch HDPE Pipe 1,000-gallon Fuel Barge Lowe Dredge Tender…
-
Sold – 2024 VMI Horizontal Dredge
Dredge Overview The MD-820P dredge is the largest of the standard VMI horizontal mini-dredge line. With all the features of our smaller horizontal cutter models this machine produces over 3000 GPM of flow. With the standard recessed impeller pump able to pass spherical solids up to 7 ¾” inch diameter this machine is ready to…
-
SOLD: 12-inch Horizontal Cutter Dredger, IMS 5012
Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 8010-HP
Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…
-
SOLD: 12-inch Horizontal Cutter Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
-
SOLD: 10-inch Horizontal Dredge, IMS 3010
This 10-inch Horizontal Dredge IMS 3010 was built in 1998. A new Cummins engine was installed in 2008. Estimated hours on the engine is 500. In 2013, a new cutterhead was installed. Pontoons are rusted and will need to be replaced. Location: State of Texas, USA Principal Dimensions and Characteristics Length Over All:…
-
SOLD: 8-inch Remote Controlled Dredge – Mud Cat 100E
Brand new Mud Cat™ Dredge. This unit has zero hrs on it. It sat on a pond for about 4 months and then has been in a storage container ever since. This unit has several extra’s. Radio Remote control with hand held remote 600’ of Power Cord A/C unit for electrical enclosure Hydraulic oil cooling…
-
SOLD: 10-inch Cutter Suction Dredge
This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection. Location: State of Florida, USA Principal Dimensions and Characteristics Length Over…
-
SOLD: 8-inch Cutter Suction Dredger (CSD)
This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…
-
SOLD: 12-inch Cutter Suction Dredge (CSD)
This 40 x 22 foot Cutter Suction Dredger has a dredging depth of 30-feet with a 12-inch suction diameter and 10-inch discharge diameter. The dredge pump was made by Georgia Iron Works. The cutter power is 60-63hp. SOLD Location: Florida General Built Year/Place: 1981 Principal Dimensions and Characteristics Length: 12.19 m 40-feet Length with Ladder:…
-
Sold: 10-inch Cutter Suction Dredger (CSD) Ellicott 370-26
This 10-inch Cutter Suction Dredger (CSD) Ellicott 370-26 has a simple design making it an ideal dredge for first-time owners. It is very easy to train on and operate and is easily portable by truck. The dredger has high durability and easy maintenance. The control system, engine, and mechanical components are specially selected for use…
-
SOLD: 6-inch “Dino 6” Horizontal Cutter Dredger
This 6-inch Horizontal Cutter Dredger was built in 2012, and has 1966 total runtime hours on it. It worked on one job-site for it’s entire life. The dredger is in great working condition and has no leaks, and no mechanical issues. It is ideal for sediment removal from small bodies of water such as (for…
-
Sold – IMS Versi-Dredge 4010 Cutterhead Dredger
Truck transportable, cable driven dredge. Location: Iowa Dredge Details Model: 1993 IMS Versi-Dredge 4010 Type: Hydraulic Horizontal Cutterhead Dredge SN: 1882 4311 HRS Engine: 5.9L Cummins 177 HP diesel engine Dual 90-gallon fuel tanks Barge dimensions: L 24’6″ x H 36″ x W 8′ Overall Width 8’6″ Overall Length 31′ Mean DRAFT 30″ 17,000# with…
-
Sold – 12-inch Horizontal Dredge, IMS 7012
The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…
