-
Not Available – 850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
Not available – 1826 m3 Trailing Suction Hopper Dredger (TSHD)
Four deck suction hopper dredger. Maximum dredging depth is 20 m. Hold capacity is 1826.42 m3. The dredger is equipped with electronic positioning fixing system. It is powered by 2 x BL 230.6 engines with total power of 1940 kw. Propulsion and steering controls are two propellers and two rudders. Location: Black Sea General …
-
SOLD: 10-inch Discharge Cutter Suction Dredger (CSD)
The dredger cannot be sold to a company working in France. Built in 2008 and modified in 2014 with 2 additional pontoons for stability, due to the dredging pipe lengthening modified to increase the dredging depth from 8 to 10 m. For the stability, 2 small pontoons were added. Location: West Mediterranean …
-
SOLD: 10-inch Cutter Suction Dredge
This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection. Location: State of Florida, USA Principal Dimensions and Characteristics Length Over…
-
Not available – 800 mm Cutter Suction Dredger
This Dredger was built in China in 2010, the vessel is a non-propelled, mono-hull, single deck, steel barge type dredger. Its Classification Society / Notation is: ZC / Navigation area: Offshore. Flag: China Located in China Price for Dredger: ¥ 129,300,000 (China RMB) Dimensions and Characteristics Length Over All: 97 m 318 feet …
-
Sold – 18-inch Cutter Suction Dredger
Includes 18-inch Cutter suction Dredger, workboat, house boat, pipes and floaters. Running hours is approximately 18,000 hours. The dredger was built in 2017. It has a length overall of 22.78 m and a breadth of 8.25 m. Draft loaded is 0.84 m. Dry weight is 60 TON. Max. dredging depth is 15 m. Production capacity…
-
Sold – 750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600
The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…
-
Not Available: 26 inch IHC Cutter Suction Dredger
This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. Its Classification Society is Bureau Veritas, the vessel had a General condition Survey of Non-Classed Vessel (For Navigation License Purpose) on April 16, 2009. This vessel is available for inspection and delivery.…
-
Sold – 10-inch (250 mm) Wolverine Dredge
The hull is composed of three compartments. The hull sides and deck is constructed from 10 gauge plate (3.57 mm). The bottom of the hull is constructed from 3/16” plate (4.7 mm). The ladder is constructed of 3”x3”x3/16” (76 mm x 76 mm x 4.7 mm) angle iron with 7 gauge (4.55 mm) metal plate…
-
SOLD: 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)
Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…
-
SOLD: 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump
Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…
-
SOLD: 18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant
The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…
-
SOLD: 12-inch Cutter Suction Dredge
This 12-inch (305 mm) Cutter Suction Dredge built by Twinkle in 2002. The dredge is transportable with side pontoons removable. Twinkle Co rotary cutter baskets are designed and built for sand and gravel dredge mining. The cylindrical pontoons are inherently strong, which requires less steel per cubic foot of displacement. Location: State of Illinois, USA…
-
Sold – 254 mm (10-inch) Custom Dredge Works CSD
Dredge Overview This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Dimensions and Characteristics Length Over All 89-feet Beam: 17-feet Depth:: 4.5-feet Draft: 0.82 …
-
Sold – 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
-
Not Available: Ellicott 1270 – 18-inch Cutter Suction Dredge (CSD)
The Ellicott Series 1270 built in 2018 is a non-self-propelled, transportable, hydraulic pipeline, cutterhead dredge. Its prime mover consists of a diesel driven centrifugal dredge pump and a diesel driven hydraulic system which powers the cutter, ladder lifting cylinders, and swing and spud winches. The dredge is fully operational. Service records available. 2 cutter heads…
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
