-
54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
57 m Hold Barge, 1135 DWT
Hold barge built in 1970 with certification that expires November 2024. The barge has a length of 57.38 m, width of 8.8 m and depth of 3.52 m. Available for sale or charter Location: Netherlands General Information Built: 1970 Certification: Expires November 2024 Dimensions and Characteristics Length Over All: 57.38 m 188.3-ft…
-
28.90 x 13.65 x 2.63 m Excavator Pontoon (Deck Barge)
The deck barge was built in 1976 and rebuilt in 2019. Comes with spud legs and lifting winches. Spuds (2) have a height of 14 m. Draft 0.65 m. Hydraulic vertical support legs built for the pontoon provides positioning depth of 12 meters. The total useful area of the pontoon is 394.5 m2. Location: Baltic…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe General Information Built:…
-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
12-inch Damien Submersible Pump and Power Unit
Damien DOP PUMP / 3025 with Power Pack. This submersible pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico Pump Dimensions and Characteristics…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
25,000 m3 Sand Carrier / Conveyor Unloading Sand Ship
This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt conveyor to unload granular…
-
12-inch Horizontal Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969…
-
Not Available – 65 m, 1339 DWT Twin Screw Ro_Ro
Built in 2004 in Istanbul. The self-propelled barge has an over all length of 66.5 m, breadth of 64.63 m and depth of 16.6 m. GT is 975 and NT is 436. The barge is powered by 2 Baudouin engines with combined 2958 hp. Fuel capacity is 71.58 m3 and daily consumption is 11.32 m3.…
-
GIW 12″ x 10″ Underwater Pump
GIW 12″ x 10″ Underwater Pump Location: State of Nebraska, USA
-
Metso 8″ x 6″ Slurry Pump w/ 50 hp electric drive
Metso 8×6 slurry pump with drive and 50 hp motor. Location: State of Nebraska, USA
-
49.6 m x 19.5 m x 4.3 m Flat Top Barge, 1,800-tonne Dead Weight (for charter)
Available for charter. Built in 1977 in Italy the barge is non-self-propelled. Class is RINA International 20 nm Offshore. 49.6 m x 19.5 m x 4.3 m Flat Top Barge has a GT to 1080 tons. Free space for loading: complete – bollards under deck. Authorized RoRo embarkment: by ramp drivable capacity T90 – per…
-
964 BHP Self-Propelled Crane Barge
Vessel especially suited for grab dredging and placing of rocks, blocks or tetrapod’s and similar placing. The Equilibrum crane has a depth of 20 m (65.6-feet) and a reach of 28.0 m (91-feet)The bucket has a capacity of 5.75m3. The vessel has a max. deck load of 4T/m2. Powered by 2 EM MOTORS GMBH K22R…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-4
LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…
-
550 m3 Self-Propelled Bottom Dumping Hopper Barge
Built in 1990 in Russia, the barge has a steel hull. It has a Class Scoieth and Notation of Phoenix 3nm offshore. Hooper capacity is 550m3 (719 yd3). It is powered by 2 overhauled VOLVO PENTA TD 162 with propulsion power of 2 x 220hp. Max speed is 9 knots and cruising speed is 6.5…
-
New Price – 12-inch Self-Propelled Horizontal Dredge IMS 5012
Built in 1999 with only 1,700 working hours. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and marina dredging projects.…
