-
10-inch SDR 32.5 HDPE Pipe
Quantity Available: 2,200-feet of 10-inch SDR 32.5 in 50-foot lengths (44 pieces). Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05 mm Pipe ID (Nominal) 10.048-inches 255.22 mm Wall Thickness (Nominal) 0.331-inches 8.407 mm Weight…
-
Dragflow HY 400B Submersible Pump w/ Cutters
Built in 2014, worked for only one shift then project cancelled. Huge inventory of spare parts including impeller and housing. The pump has a capacity of 1020-1150 m3/h and motor power of 300-410 hp. The main body is spheroidal cast iron GS500 and main shaft is austempering NiCrMo4 Steel. The cutter is a Hydraulic excavator…
-
6-inch Horizontal Cutter Dredger “Dino 6”
This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutterhead, boom, and cable system that was used on 1 small job after it was installed.…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
12-inch SDR 11 Polyurethane Pipe (HDPE, Polypipe)
Quantity Available: 35,000-feet in 50-foot lengths. Pipe has been fused for fresh water service. Sold only by the truckload. Minimum purchase of 2,400 ft (one truck load). Location: State of Texas, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
Sold – 8-inch Swinging Ladder Cutter Suction Dredge – Ellicott 300 SL
Built in 2009 and purchased new in 2011. Highly portable swing ladder designed to work in narrow channels and small projects. One truck transportable. Maximum dredging depth of 15-ft and min depth of 2-ft 4-in. Width of cut at depth of 15-ft is 18-ft 3-in and at depth of 2-ft 4-in is 22-ft. Powered by…
-
ali 20 inch Ellicott Dredge 1870
Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…
-
18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
15 m3 Duty Cycle Bucket Dredge and 4000 cu/yd Dump Scow
The dredge hull was built in 1999. The crane was built in the 1960’s and had a complete rebuild 2021 and 2022. The dredge is a conventional configuration, all welded steel construction, single skin, non self-propelled deck barge which is outfitted for dredging operations. The vessel is set up to be worked on (3) spuds,…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
6-inch SDR 32.5 HDPE Polypipe
Quantity Available: 1,000-feet of 6-inch SDR 32.5 Pipe. 50 pieces in 20-ft lengths with Gheen fittings. Location: State of Illinois, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 6.625-inch 168.275-mm Pipe ID (Nominal) 6.2-inch 157.48 mm Wall Thickness (Nominal) 0.204-inch 5.182…
-
720 hp Twin Screw General Purpose Towing Tug
Built in 2023 in Turkey, the tug is powered by 2 x Doosan L126TIH with 720 hp. Gearbox is Dongii DMT 170HL with ratio 4.48:1. Propellers are fixed in Kort nozzle : dia. 1300 mm. Bollard pull is 10T. The tug has a SWL 7.5 T deck winch and a SWL 900 kg @ 8…