-
SOLD: 10-inch Disch. Horizontal Cutter Dredger IMS Model 4010
Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…
-
SOLD: 18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
Sold – 254 mm (10-inch) Custom Dredge Works CSD
Dredge Overview This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Dimensions and Characteristics Length Over All 89-feet Beam: 17-feet Depth:: 4.5-feet Draft: 0.82 …
-
Sold – 500 mm (20-inch) Ellicott 1870 CSD
Dredge Overview This 20-inch Ellicott 1870 Cutter Suction Dredge is a medium/large size dredge that is portable and truckable to an inland location. Through the use of two large diesel engines, the production rate is quite high for a portable dredge. The 1870 is able to dredge up to 15 m deep, allowing it to…
-
SOLD: 8-inch Horizontal Cutter Dredge – VMI Model 815
This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job. Location: Texas, USA Principal Dimensions and Characteristics Year Built: 2014 Serial Number: 824 Length: 11.73 m 38.6 feet Height (without A/C): 2.69 m…
-
Sold – 10-inch Horizontal Cutter Dredge – IMS 5012-HP
Dredger Info The dredger was built in 2004 has and has 6025 total runtime hours. It has been sandblasted and painted every year since 2004. The dredge is in top running condition and currently working. Comes with 1000′ of 10″ HDPE pipe and 200′ of Flex Hose. Location: State of Texas, USA Dimensions and Characteristics…
-
Sold – DSC Barracuda 10-inch Swinging Ladder Dredge
Built in 1997 and rebuilt/refurbished in 2012, the swing ladder dredger has an overall length of 64-ft 4-in, a transportation width of 11-ft 10-in and an operating width of 18-ft 6-in. Mean draft is 30-in. Max dredging depth is 18-ft and min is 3-ft. The dredge pump has a suction diameter of 12 inches and…
-
Sold – 2020 Mud Cat Auger Dredge
Dredge Overview This 2020 Mud Cat MC275D has approximately 6,300 hours of operation and features a one-truck transportable dredging system equipped with both a cable drive system and a heavy-duty dual marine prop drive system for self-propelled dredging. It has a 25 ft max dredging depth, and a nominal capacity of 3,000 GPM (681 m³/hr)…
-
Not Available – 8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
SOLD: 20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
Sold – 16-inch AMMCO Cutter Suction Dredge (CSD)
Dredge Info Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest…
-
Sold – 6-inch Horizontal Cutter Dredger, LWT 3010 “Pit Hog”
This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location: State of Minnesota, USA …
-
Not Available: 22-inch/560 mm Self Propelled Submersible Pump Sand Dredger
Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is…
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Not Available: 600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
-
Sold – 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
Not Available: 10-inch Cutter Suction Dredger (CSD)
Fully reconditioned in 2002, the dredger was originally built in 1987. Dredge pump is a Warman with dredging depth of 10m (32.81-ft), a suction diameter of 305 mm (12-inch) and a discharge diameter of 254 mm (10-inch). Delivery of sand is 150 m3/h. The dredger is powered by V16 GM and 6 cylinder DAF with…
