Dredging Equipment – Dredge Brokers

Dredge Info This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently located in a boatyard. Location: New Jersey Dimensions and…

Dredger Info The dredger was built in 2004 has and has 6025 total runtime hours. It has been sandblasted and painted every year since 2004. The dredge is in top running condition and currently working. Comes with 1000′ of 10″ HDPE pipe and 200′ of Flex Hose. Location: State of Texas, USA Dimensions and Characteristics…

Motivated Seller. Remote controlled dredge with horizontal auger. Operates in a cable environment and can be partially or fully automated. The FLUMP (floating lagoon pumper) are simple to operate, and easy to transport. The dredge operator isn’t exposed to potentially hazardous dredged materials. Remote control is user friendly and works in rain. Pontoons are 4.27…

Dredge Overview The MD-820P dredge is the largest of the standard VMI horizontal mini-dredge line. With all the features of our smaller horizontal cutter models this machine produces over 3000 GPM of flow. With the standard recessed impeller pump able to pass spherical solids up to 7 ¾” inch diameter this machine is ready to…

IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…

This 10-inch Horizontal Dredge IMS 3010 was built in 1998. A new Cummins engine was installed in 2008. Estimated hours on the engine is 500. In 2013, a new cutterhead was installed. Pontoons are rusted and will need to be replaced. Location: State of Texas, USA   Principal Dimensions and Characteristics   Length Over All:…

Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…

Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight…

Brand new Mud Cat™ Dredge. This unit has zero hrs on it. It sat on a pond for about 4 months and then has been in a storage container ever since. This unit has several extra’s. Radio Remote control with hand held remote 600’ of Power Cord A/C unit for electrical enclosure Hydraulic oil cooling…

This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…

This 40 x 22 foot Cutter Suction Dredger has a dredging depth of 30-feet with a 12-inch suction diameter and 10-inch discharge diameter. The dredge pump was made by Georgia Iron Works. The cutter power is 60-63hp. SOLD Location: Florida General Built Year/Place: 1981 Principal Dimensions and Characteristics Length: 12.19 m 40-feet Length with Ladder:…

This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection. Location: State of Florida, USA           Principal Dimensions and Characteristics   Length Over…

This 6-inch Horizontal Cutter Dredger was built in 2012, and has 1966 total runtime hours on it. It worked on one job-site for it’s entire life. The dredger is in great working condition and has no leaks, and no mechanical issues. It is ideal for sediment removal from small bodies of water such as (for…

This 10-inch Cutter Suction Dredger (CSD) Ellicott 370-26 has a simple design making it an ideal dredge for first-time owners. It is very easy to train on and operate and is easily portable by truck. The dredger has high durability and easy maintenance. The control system, engine, and mechanical components are specially selected for use…

Truck transportable, cable driven dredge. Location: Iowa Dredge Details Model: 1993 IMS Versi-Dredge 4010 Type: Hydraulic Horizontal Cutterhead Dredge SN: 1882 4311 HRS Engine: 5.9L Cummins 177 HP diesel engine Dual 90-gallon fuel tanks Barge dimensions: L 24’6″ x H 36″ x W 8′ Overall Width 8’6″ Overall Length 31′ Mean DRAFT 30″ 17,000# with…