-
Not Available: 12-inch Horizontal Dredge IMS 7012
The dredge was used in Florida on a peat bog for all 6,410 hours, so no major wear on the pump or cutter. This unit was repainted and refurbished at IMS’s factory for a total cost of $77,000. Some of the major components replaced included: Both Starwheel gearboxes, hydraulic cylinders, hydraulic valve bank, duo cone…
-
Sold – 6-inch Horizontal Cutter Dredger, LWT 3010 “Pit Hog”
This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location: State of Minnesota, USA …
-
Not Available: 600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Not Available: 10-inch Cutter Suction Dredger (CSD)
Fully reconditioned in 2002, the dredger was originally built in 1987. Dredge pump is a Warman with dredging depth of 10m (32.81-ft), a suction diameter of 305 mm (12-inch) and a discharge diameter of 254 mm (10-inch). Delivery of sand is 150 m3/h. The dredger is powered by V16 GM and 6 cylinder DAF with…
-
Not Available: 22-inch/560 mm Self Propelled Submersible Pump Sand Dredger
Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is…
-
Not Available: 8-inch Rebuilt Cutter Suction Dredger (CSD)
This 8-inch Rebuilt Cutter Suction Dredger (CSD) was completely overhauled in 2014. The dredger is compact, easy to transport and capable of a wide range of activities like maintenance dredging, sand winning and gravel winning. By means of the extensive renovation a KISS (keep it simple sir) type modern dredger is created by the former…
-
Not Available: IMS Model 4010-LP – 10-inch Horizontal Dredge
This IMS Model 4010-LP – 10-inch Horizontal Dredge was built in October, 1996. The Dredge was recently rebuilt in 2015 by CDW and it has new pontoons designed by CDW to fit existing footprint/frame. The entire hydraulic system was redone as well and the dredge was also painted. All functions operate. Engine assembly is original…
-
Sold – 406.4 mm (16-inch) Cutter Suction Dredger
Dredge Overview This 16-inch Cutter Suction Dredger was built in 2010 and can be purchased with or without a 16″ booster pump. The Dredge and booster barge require trucks for transportation, including one oversize load. It fully meets California environmental regulations and the dredge pump is in excellent condition. Only a few hundred hours on…
-
Not Available: 800 mm (32-inch) Cutter Suction Dredger (CSD)
This 800 mm (32-inch) Cutter Suction Dredger (CSD) was built in 2009 and its Classification Society and Notation is CCS (China Classification Society), Unrestricted Navigation. Flag: China Located China Dimensions and Characteristics Year Built: 2009 Classification Society/Notation: CCS (China Classification Society), Unrestricted Navigation Length Over All: 108.00 m 354 feet…
-
Not Available: 8-inch Sand and Gravel Dredger
This 8-inch Sand and Gravel Dredger comes with approx. 300 feet of 8 inch pipe. Located in the state of Michigan, USA Principal Dimensions and Characteristics Main Engine Make/Model: Caterpillar / 3306 (diesel with a turbo) Power: 224 kW 300 hp Discharge & Pipe Discharge Diameter: 203.2 mm 8 inches Pipe Size/length (approx.): 203.2…
-
Not Available: 12-inch Cutter Suction Dredger
This 12-inch Cutter Suction Dredger was built in 2008 and is in perfect working order. the price includes 100 m of floating (rubber) pipe. Located in Lithuania Principal Dimensions and Characteristics Year Built: 2008 Length Over All: 18.00 m 59 feet Beam: 5.00 m 16 feet Depth: 3.50 m 11…
-
Not Available: 30-inch Cutter Suction Dredgers
These (2) two Cutter Suction Dredgers were built in March, 2010. Their Classification Society is CCS (China Classification Society). They are both ready for inspection and delivery. Located in China Price for Dredgers (each): USD $ 4,435,000 Principal Dimensions and Characteristics Year Built: 2010 Classification Society / Class: CCS (China Classification Society)…
-
Sold – 10-inch Horizontal Cutter Dredge IMS 7012 HP “Versi-Dredge”
The machine was delivered to the seller new in 2007 and has 1,860 hours on the clock. It is in good working order. Located in the West of Ireland Principal Dimensions and Characteristics Length Over All: 15.7 m 51.5 feet Width: 3.6 m 11.8 feet Height: 3.2 m 10.5 feet …
-
Sold: Custom Self Propelled 8″ Horizontal Cutter Dredge with Gooseneck Trailer
Custom self-propelled 8″ Horizontal Cutter Dredger with Gooseneck trailer. Location: Georgia Specs Custom built, 8″ self-propelled dredge 7 ft cutter head on 21 ft elevator (part that moves while cutting) 2022 twin 90hp Yamaha 8″ discharge with a 6″ step down Enclosed cab 30′ Anderson Manufacturing Gooseneck Trailer VIN: 4YNBN2923LC090251 All details on these pages…
-
SOLD: Dino 6 Horizontal Cutter Dredge
2012 Dino 6 Hydraulic Horizontal Cutter Dredge, built in 2012 with only 120 hours. Ideal for sediment removal from small bodies of water like retention ponds, canals, marinas, sediment lagoons, and small lakes. This is a very portable dredge and has a customized tilting trailer to fit the dredge and discharge pipe. Located in the…
-
SOLD: Ellicott 370 Dragon Hydraulic Cutter Suction Dredge
2002 model. Built longer than full length side tanks to extend the hull to 48′ LOA and 21′ WOA, they connect to the existing hull with Ellicott OEM hook and socket connections at the bottom similar to the 670 model and bolted connections above deck. The perimeter of the deck is fitted with 1.5″ speed…
-
SOLD: 1998 VMI 815 8″ Auger Dredge
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
