Hydraulic Dredgers





Filters
Search

  • 16-inch Cutter Suction Dredge (CSD), AMMCO PD-16-14

    16-inch Cutter Suction Dredge (CSD), AMMCO PD-16-14

    • 506,000 USD
    • 190801-DB

    Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest for the…

  • NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-5

    NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-5

    • 40,000 USD
    • 200727-DH
    • Location: California

    LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…

  • Sold – 12-inch Horizontal Dredge, IMS 7012

    Sold – 12-inch Horizontal Dredge, IMS 7012

    • 530,000 USD
    • 200919-DH
    • Location: Florida

    The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…

  • New Price – 12-inch Self-Propelled Horizontal Dredge IMS 5012

    New Price – 12-inch Self-Propelled Horizontal Dredge IMS 5012

    • 122,000 USD
    • 201013-DH
    • Location: Washington

    Built in 1999 with only 1,700 working hours. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and marina dredging projects.…

  • NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-4

    NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-4

    • 40,000 USD
    • 200726-DH
    • Location: California

    LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…

  • 12-inch Horizontal Dredge IMS 5012-HP

    12-inch Horizontal Dredge IMS 5012-HP

    • 218,000 USD
    • 220304-DH
    • Location: North Carolina

    Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…

  • 10-inch Swinging Ladder Dredge

    10-inch Swinging Ladder Dredge

    • 200,000 USD
    • 220607-DL
    • Location: New Jersey

    Built in 1997 and rebuilt/refurbished in 2012, the swing ladder dredger has an overall length of 64-ft 4-in, a transportation width of 11-ft 10-in and an operating width of 18-ft 6-in. Mean draft is 30-in. Max dredging depth is 18-ft and min is 3-ft. The dredge pump has a suction diameter of 12 inches and…

  • Not Available – 6-inch Jet Cutter Dredger, Highly Transportable

    Not Available – 6-inch Jet Cutter Dredger, Highly Transportable

    • 180228-DW
    • Location: Netherlands

    This listing is for a 6-inch Jet Cutter Dredger that is very easy to work with and highly transportable. This dredger is good for gold, and aggregates mining, or light general contracting. Location: Netherlands Dredging Capacities Max. Dredging Depth: 18 m 59-feet Engine Make/Model: Iveco Power: 172 kW 230 hp Cutter Type: Hydraulic Jet Cutter…

  • 16-inch Cutter Suction Dredger, DSC Model 750

    16-inch Cutter Suction Dredger, DSC Model 750

    • 650,000 USD
    • 170613-DB

    This listing is for a 16-inch Cutter Suction Dredger, DSC Model 750 that was built in 1993. Overall the dredge is in very good conditions, it has been used for only one project and the original owner from which it was purchased used it for a very short period of time on very loose sand…

  • 14 x 12-inch AMMCO Dredge

    14 x 12-inch AMMCO Dredge

    • 450,500 USD
    • 150118-DB
    • Location: New Jersey

    Dredge Info This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently located in a boatyard. Location: New Jersey Dimensions and…

  • 200 mm (8-inch) Electric Powered Cutter Suction Dredge

    200 mm (8-inch) Electric Powered Cutter Suction Dredge

    • 270,000 EUR
    • 120911-DB
    • Location: Greece

    This dredge was built in 1990. The dredge is fully electrical dredge and is in very good condition and very easy to operate. The price includes 250 m cable 4 x 180 and 250 m metal hose and all necessary needs to work. The dredge can be plugged into a 400 kw-380 V generator or…

  • 8-inch Bucket Wheeler Cutter Dredger

    8-inch Bucket Wheeler Cutter Dredger

    • 799,000 USD
    • 220805-DR
    • Location: Australia

    Neumann built 8″ Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and the hydraulic…

  • 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D

    8-inch Horizontal Cutter Suction Dredge Mud Cat 115D

    • 260,000 USD
    • 220608-DH
    • Location: New Jersey

    Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of…

  • SOLD: 8-inch Horizontal Cutter Dredge Mudcat MC-15

    SOLD: 8-inch Horizontal Cutter Dredge Mudcat MC-15

    • 77,000 USD
    • 220211-DH

    This Mud Cat dredge is ideal for most horizontal auger dredge applications, including agricultural and industrial ponds, marina maintenance, canals, etc. The dredger is powered by a Detroit Diesel 6-71 RC/model 6030N) with 175 hp @1800 RPM. It has a dredging depth of 15-ft. Comes with 250-ft of 10″ fixed HDPE pipe. Location: State of…

  • SOLD: 12-inch IMS 5012 Horizontal Cutter Dredger

    SOLD: 12-inch IMS 5012 Horizontal Cutter Dredger

    • 153,000 USD
    • 220202-DH

    One-truck transportable hydraulic dredge features IMS’s patented Starwheel® drive self-propulsion system eliminating the need for cables or spuds. The 5012 LP is ideal for lake, canal, and river dredging projects. Built in 1997 the dredger has 4,387 working hours. Powered by a Cummins Diesel engine with 250 hp. Propulsion is by Starwheel Drive self-propulsion. Additional…

  • 22-inch Cutter Suction Dredger (CSD) IHC Beaver 2300

    22-inch Cutter Suction Dredger (CSD) IHC Beaver 2300

    • 1,025,000 USD
    • 210501-DB

    The IHC Beaver 2300 has a suction diameter of 24-inches (607mm), a discharge diameter of 22-inches (559 mm) and a dredge pump capacity of 2600 m3/h. It is powered by a CAT 3516. Auxiliary powered by CAT 3412 & D398. Built in 1970. It has a length of 28m, a breadth of 10 m and…

  • 20 inch Cutter Suction Dredger, IHC Beaver 5014C

    20 inch Cutter Suction Dredger, IHC Beaver 5014C

    • 830,000 EUR
    • 181219-DB

    This 20-inch Cutter Suction Dredger, IHC Beaver 5014C was built in the Netherlands 2004. The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. This Dredge is in complete operating condition. Flag: Commonwealth of Dominica Location: Latvia Principal Dimensions and Characteristics Year Built: 2004 Length Over All : 35.1 m…

  • 10-inch Cutter Suction Dredge

    10-inch Cutter Suction Dredge

    • 628,000 USD
    • 161205-DB

    This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Location: Southern British Colombia, Canada           Principal Dimensions and Characteristics   Length Over All 89-feet     Beam: 17-feet…