Dredging Equipment – Dredge Brokers

This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…

Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…

This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job. Location: Texas, USA Principal Dimensions and Characteristics   Year Built: 2014   Serial Number: 824   Length: 11.73 m 38.6 feet   Height (without A/C): 2.69 m…

This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…

The Ellicott Series 1270 built in 2018 is a non-self-propelled, transportable, hydraulic pipeline, cutterhead dredge. Its prime mover consists of a diesel driven centrifugal dredge pump and a diesel driven hydraulic system which powers the cutter, ladder lifting cylinders, and swing and spud winches. The dredge is fully operational. Service records available. 2 cutter heads…

This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location:  State of Minnesota, USA  …

The dredge was used in Florida on a peat bog for all 6,410 hours, so no major wear on the pump or cutter. This unit was repainted and refurbished at IMS’s factory for a total cost of $77,000. Some of the major components replaced included: Both Starwheel gearboxes, hydraulic cylinders, hydraulic valve bank, duo cone…

This IMS Model 4010-LP – 10-inch Horizontal Dredge was built in October, 1996. The Dredge was recently rebuilt in 2015 by CDW and it has new pontoons designed by CDW to fit existing footprint/frame. The entire hydraulic system was redone as well and the dredge was also painted. All functions operate. Engine assembly is original…

This 8-inch Sand and Gravel Dredger comes with approx. 300 feet of 8 inch pipe. Located in the state of Michigan, USA   Principal Dimensions and Characteristics Main Engine Make/Model: Caterpillar / 3306 (diesel with a turbo) Power: 224 kW 300 hp Discharge & Pipe Discharge Diameter: 203.2 mm 8 inches Pipe Size/length (approx.): 203.2…

Custom self-propelled 8″ Horizontal Cutter Dredger with Gooseneck trailer. Location: Georgia Specs Custom built, 8″ self-propelled dredge 7 ft cutter head on 21 ft elevator (part that moves while cutting) 2022 twin 90hp Yamaha 8″ discharge with a 6″ step down Enclosed cab 30′ Anderson Manufacturing Gooseneck Trailer VIN: 4YNBN2923LC090251 All details on these pages…

2012 Dino 6 Hydraulic Horizontal Cutter Dredge, built in 2012 with only 120 hours. Ideal for sediment removal from small bodies of water like retention ponds, canals, marinas, sediment lagoons, and small lakes. This is a very portable dredge and has a customized tilting trailer to fit the dredge and discharge pipe. Located in the…

2002 model. Built longer than full length side tanks to extend the hull to 48′ LOA and 21′ WOA, they connect to the existing hull with Ellicott OEM hook and socket connections at the bottom similar to the 670 model and bolted connections above deck. The perimeter of the deck is fitted with 1.5″ speed…

Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…

Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…

This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutter head, boom, and cable system that was used on 1 small job after it was…