-
Not Available – 10-inch Swinging Ladder Dredge w/ Traveling Spud
This listing is for a 10-inch Swinging Ladder Dredge w/ Traveling Spud that was rebuilt in 2012 and 2016. It has a diesel engine that was also rebuilt in 2016, the Traveling Spud is hydraulically operated and it comes with the following additional equipment: 3,000-feet of 12-inch HDPE Pipe 1,000-gallon Fuel Barge Lowe Dredge Tender…
-
Sold – Long Reach CAT 336 Excavator
Excavator Information Long reach CAT 336 excavator with clamshell and grapple for mechanical dredging, and a 8″ hydraulic pump for hydraulic dredging. Can dredge up to 45′ underwater. Sold with vessel linked below. Can be purchased with 160 ft. Crew Boat 240807-VO. With purchase of vessel this creates a turnkey dredging system or vessel only for…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
-
SOLD: 10-inch Cutter Suction Dredge
This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection. Location: State of Florida, USA Principal Dimensions and Characteristics Length Over…
-
SOLD: 10-inch Discharge Cutter Suction Dredger (CSD)
The dredger cannot be sold to a company working in France. Built in 2008 and modified in 2014 with 2 additional pontoons for stability, due to the dredging pipe lengthening modified to increase the dredging depth from 8 to 10 m. For the stability, 2 small pontoons were added. Location: West Mediterranean …
-
Not available – 1826 m3 Trailing Suction Hopper Dredger (TSHD)
Four deck suction hopper dredger. Maximum dredging depth is 20 m. Hold capacity is 1826.42 m3. The dredger is equipped with electronic positioning fixing system. It is powered by 2 x BL 230.6 engines with total power of 1940 kw. Propulsion and steering controls are two propellers and two rudders. Location: Black Sea General …
-
Sold – 750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600
The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…
-
Not Available: 26 inch IHC Cutter Suction Dredger
This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. Its Classification Society is Bureau Veritas, the vessel had a General condition Survey of Non-Classed Vessel (For Navigation License Purpose) on April 16, 2009. This vessel is available for inspection and delivery.…
-
SOLD: 18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant
The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…
-
Sold – 254 mm (10-inch) Custom Dredge Works CSD
Dredge Overview This is a portable, single engine dredger with 1591 total runtime hours. The dredger was built in 2015, and is in full running condition and ready to be placed on a job. Dimensions and Characteristics Length Over All 89-feet Beam: 17-feet Depth:: 4.5-feet Draft: 0.82 …
-
Sold – 16-inch AMMCO Cutter Suction Dredge (CSD)
Dredge Info Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest…
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
Not Available: 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
Not Available: 14-inch Submersible Pump Dredge, Electric Drive
Pontoon mounted submersible pump with cutter suction (HY400 with Power Pack) was built in 2016 in Italy. The dredge pump has a capacity of 1200 m3/h with a head of 42 m. Dredging depth is 25.0 m. Suction diameter is 1015 mm and discharge pipe diameter is 300 mm. Discharge distance is 1000 mm. The…
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Not Available: 12-inch Cutter Suction Dredger
This 12-inch Cutter Suction Dredger was built in 2008 and is in perfect working order. the price includes 100 m of floating (rubber) pipe. Located in Lithuania Principal Dimensions and Characteristics Year Built: 2008 Length Over All: 18.00 m 59 feet Beam: 5.00 m 16 feet Depth: 3.50 m 11…
-
Not Available: 30-inch Cutter Suction Dredgers
These (2) two Cutter Suction Dredgers were built in March, 2010. Their Classification Society is CCS (China Classification Society). They are both ready for inspection and delivery. Located in China Price for Dredgers (each): USD $ 4,435,000 Principal Dimensions and Characteristics Year Built: 2010 Classification Society / Class: CCS (China Classification Society)…
