-
12-inch & 16-inch Floating Hoses
12-inch & 16-inch Floating Hoses. Dynlop hoses used but reported to be in very good condition. Location: Baltic Sea Hoses available: Floating – 12″x9,1 m. Total – 8 pcs. Price 8 x 1176 EUR Floating – 16″x12,2 m. Total – 6 pcs. Price – 6 x 1,765 EUR Submarine – 1 pc 16″x12,2 m Total…
-
2″ SDR 7 HDPE Pipe
Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA Pipe Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 2.37 inches 60.2-mm Pipe ID (Nominal) 1.66 inches 42.2-mm Wall Thickness (Nominal) 0.339 inches 8.6-mm Weight Per Foot 0.95 pounds 0.4 kg Standard Dimension Ratio (SDR) 7 Our pipe inventory changes…
-
10-inch SDR 17 Stub Ends with Flanges
Approximately 98 stub ends with flanges. Location: State of Oregon, USA USD 75.00 per end Our pipe inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.
-
200 ton Crane Barge w/ American 9520 mounted crane
All welded deck barge with raked bow. Barge has an American 9520 – Deck mounted crane with capacity of 200 Ton. Boom length is 180-ft. The barge has a length of 250.1-ft, breadth of 60.1-ft and depth of 11.6-ft. The draft is 3.0-ft and GT is 1694.Location: State of New Jersey, USA …
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has a 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…
-
8-inch Bucket Wheeler Cutter Dredger
Neumann built 8″ Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and the hydraulic…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
Twin 290-man Accommodations Barges
Year built 2009. The barge is 76.16 m (250-ft) in length and has a beam of 17.76 m (58-ft). Maximum draft is 3.0 m (9.84-ft). It has a fresh water capacity of 170 m3, fuel oil capacity of 80 m3 and sewage waste capacity of 580 m3. Equipment include (2) 800 kW CAT generator, (2)…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…
-
3300 PSI 25 GPM Hydraulic Power Unit (HPU)
This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
3,600-tonne Lifting Jack Up Barge w/ 21 Pax Accommodations
48 x 28 x 4.5 m barge with 60 m legs. The jacking system is a SAMBO C.M.C. Lifting weight is 3600T and holding weight is 4,800T. Jacking speed up and down is 40 m/hr. The barge can operate in a depth of 40 m and wave height of 2.5 m. It has accommodations for…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
10-inch SDR 17 HDPE Pipe
Quantity Available: 13,000-feet in approximate 40-foot lengths. Location: State of New Jersey, USA USD 8.25 per foot Dimensions and Characteristics Material High Density Polyethylene Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds 4 kg Standard Dimension Ratio (SDR) 17 Our pipe inventory changes weekly.…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid passage of…
-
16-inch Hose, Flange x Flange, non floating (NEW)
The hoses are Trelleborg, 16-inches ID, pressure rating 15 bar, (225 psi). Electrically continuous. 8 pieces each with a length of 40-feet. Location: State of Texas, USA USD 6,500 each hose Our pipe inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email…
