-
10-inch Slurry Hose
Quantity Available – 132-feet. Hose is in very good condition. Used for only one specific job. Very low hours. Location: State of California, USA Dimensions and Characteristics Hose Inner Diameter: 254 mm 10-in Outer Diameter: 288 mm 11.3-in Thickness of Inner Layer: 8 mm 5/16-in Working Pressure: 150 PSI Standard ANSI 150 PSI Flange Specification…
-
12-inch SDR 11 HDPE Pipe (Polypipe)
Quantity Available: -65,000-feet cut in 50-ft lengths. Reported to have no internal wear. Pipe used to transport water. Location: State of Pennsylvania, US Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
900- hp Twin Screw Truckable Tug for Charter
Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above…
-
12-inch SDR 17 HDPE (Polypipe) with some Flanges
Quantity Available: – 7,000 feet. Pipe is in very good condition. It was purchased for a specific job, it was never used again. Very low hours and excellent condition. The pipe was in 300’ lengths with flanges on each end. It was cut to 100’ lengths for storage and can be cut to 50’ for…
-
128 m3 New Non-Propelled Split Hopper Barge
New Barge – Just used for testing. Built in 2020. The 128 m3 hopper capacity has a load capacity of 150 tons. Barge opening system is with hydraulic actuators – Iveco diesel hydraulic unit new with 150hp. Length is 24.146 m and width is 7.520 m. Location: Northern Europe General Built: 2020 Dimensions and…
-
50-tonne Modular Jack Up Barge
15 m x 12 m x 1.5 m dismountable jack up barge. Movable using 5 trucks (3 x 40-ft and 2 x 60-ft). Spuds are 20 m in length and wall thickness of 20 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 50 tonnes. Location: Ireland Principal…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
6 m3 Grab Bucket Dredger w/ Mitsubishi S6N-MPTA Crane
6 m3 Grab Bucket Dredger was built in 1976. The dredge has a length of 33.62 m, a breadth of 15.0 m and depth of 2.50m. The crane is a SKK 570 GDX-F with a capacity of 100 tons. Boom length is 28.0 m. Dredging capacity is 570 m3/h. The main engine is a 145hp…
-
1,300-Tonne, 150-man Jack Up Barge with DP2
The platform is defined as a self-propelled Jack-up that is designed as according to a GustoMSC type NG-2500X which mainly designated for operation in worldwide ocean environments with sea water depths up to 70 m at all specified weather and the sea conditions stated in specification at that region. The unit is intended to be…
-
12-inch SDR 17 HDPE Polyethylene Pipe
Quantity Available: – 7,500 feet. Pipe was used for construction water on one job so no ID wear and outside in pretty good shape. Price based on one truckload of 42 pieces or 2,100-feet. Price will reduce with purchase of 4 or more truckloads. Located in the State of California, USA Principal Dimensions and Characteristics…
-
80 tonne Modular Jack Up Barge
18 m x 12 m dismountable jack up barge. Movable using 10 trucks (8 x 40-ft and 2 x 60-ft). Spuds are 18 m in length and wall thickness of 25 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 80 tonnes. Location: Ireland Dimensions and Characteristics …
-
60 inch Pipe Lay Barge with DP and Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
Not Available – 16-inch SDR 17 HDPE
Quantity Available – 6,000-ft in 500 to 1000 foot strings. $14.30 per foot Location: State of Louisiana, USA Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm 0.941 inches Weight Per Foot 19.42 lbs per foot Standard…
-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
12-inch SDR 11 HDPE Pipe
Quantity Available: – 6,000 feet. Pipe was only used on one job pumping slit and shows very little wear, if any. Price includes delivery to Port of Seattle, Washington USA Location: State of Hawaii, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261…
-
41-foot Aluminum High Speed Work Boat
US Coast Guard UTB Vessel built in 1975, the Huron Explorer is 41-ft in length, has a beam of 14-ft and draft of 4-ft. The boat is powered by 2 Cummins engines with 320hp. The boat has an aluminum hull with new bottom paint. SOLD Location: state of Florida, USA General Built Year: 1975 Hull:…
-
12-inch SDR 17 HDPE Pipe
Quantity Available: – 5,500 feet. Pipe was only used on one job pumping slit and shows very little wear, if any. Price includes delivery to Port of Seattle, Washington USA Also available 12-inch SDR 11 HDPE – see 210407-PP. Both can be purchased “en block” for a significant freight advantage. Located in the State of Hawaii,…
-
12-inch SDR 17 Pipe in 20-foot Sections
Quantity Available – 640-feet of 12-inch SDR 17 Pipe in 20-ft sections. Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyethylene Pipe ID (Nominal) 11.160-inches 284 mm Pipe OD (Nominal) 12.74-inches 323.6 mm Wall Thickness (Nominal) 0.75-inches 19.05 mm Weight Per Foot 12.42-lbs 5.63 kg Our pipe inventory changes weekly. If…
