-
406.4 mm (16″) Cutter Suction Dredger, DSC Model 750
Dredge Overview This listing is for a 16-inch Cutter Suction Dredger, DSC Model 750 that was built in 1993. Overall the dredge is in very good conditions, it has been used for only one project and the original owner from which it was purchased used it for a very short period of time on very…
-
14 x 12-inch AMMCO Dredge
Dredge Info This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently located in a boatyard. Location: New Jersey Dimensions and…
-
203 mm (8″) Mud Cat 115D Cutter Suction Dredge
Dredge Overview Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid…
-
500 mm (20-inch) Ellicott 1870 CSD
Dredge Overview This 20-inch Ellicott 1870 Cutter Suction Dredge is a medium/large size dredge that is portable and truckable to an inland location. Through the use of two large diesel engines, the production rate is quite high for a portable dredge. The 1870 is able to dredge up to 15 m deep, allowing it to…
-
Sold – 3″ Remote Controlled Crisafulli Dredge
Motivated Seller. Remote controlled dredge with horizontal auger. Operates in a cable environment and can be partially or fully automated. The FLUMP (floating lagoon pumper) are simple to operate, and easy to transport. The dredge operator isn’t exposed to potentially hazardous dredged materials. Remote control is user friendly and works in rain. Pontoons are 4.27…
-
Sold – 8″ Swinging Ladder Dredge
8″ Swinging Ladder Dredge available for sale. 2006 LWT/Ellicott 8′ self walking dredge. 2024 Trimble/Dredgepack GPS Guided. Location: North America Quick Info Optional equipment; 12,000′ of 8″ SDR17 HDPE pipe Floats, weights, and other misc., equipment Dimensions & Info Length Overall: 56′-6″ Width Overall: 10′ Width (shipping): 10″-6″ Height (without spuds):…
-
Not Available – Series 2070 Dragon® Hydraulic Cutter Suction Dredge
The 2070 Series is a portable hydraulic cutter suction dredge that’s truckable to locations and is capable of dredging up to 50′. Quick Overview Easily transported by truck Designed to Bureau of Veritas (B.V.) Sheltered Water Rules and is suitable for a variety of applications including harbors, rivers, and sand mining projects Hydraulic system was…
-
Not Available – 10-inch Portable Dredge Ellicott 370-33
This 10-inch Cutter Suction Dredge (CSD) Ellicott 370-33 was commissioned in 2012 and has been completely overhauled in 2014, 2016 and 2020. The dredge has 42,094 operational hours and was operated in a mine tailings reclamation project in the Dominican Republic. The dredge has been well maintained with all C15 engine rebuilds completed by the…
-
Not Available – 10-inch Portable Ellicott Dredge 370-42
This 10-inch Ellicott 370-42 was commissioned in 2017 and has been completely overhauled in July 2020. The dredge has 17,685 operational hours and was operated in a mine tailings reclamation project in the Dominican Republic. The dredge has been well maintained with all C15 engine rebuilds completed by the local authorized Caterpillar dealer. On hard…
-
Sold – 1984 Ellicott 370 Dragon Cutter Suction Dredger
Dredge Info Built in 1984. Rebuilt pump with low hours. Everything works. Cab and controls need to be rebuilt and modernized. Used for dredging marinas, lakes and rivers, channels, canals, sand mining, more. Dredge package also includes 2000′ of flanged 10″ SDR 17 HDPE pipe and 40 – 10″ pipe floats. Location: Northwest, USA Dimensions…
-
Not Available – 10-inch Swinging Ladder Dredge w/ Traveling Spud
This listing is for a 10-inch Swinging Ladder Dredge w/ Traveling Spud that was rebuilt in 2012 and 2016. It has a diesel engine that was also rebuilt in 2016, the Traveling Spud is hydraulically operated and it comes with the following additional equipment: 3,000-feet of 12-inch HDPE Pipe 1,000-gallon Fuel Barge Lowe Dredge Tender…
-
Sold – 2024 VMI Horizontal Dredge
Dredge Overview The MD-820P dredge is the largest of the standard VMI horizontal mini-dredge line. With all the features of our smaller horizontal cutter models this machine produces over 3000 GPM of flow. With the standard recessed impeller pump able to pass spherical solids up to 7 ¾” inch diameter this machine is ready to…
-
SOLD: 12-inch Horizontal Cutter Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…
-
SOLD: 10-inch Horizontal Dredge, IMS 3010
This 10-inch Horizontal Dredge IMS 3010 was built in 1998. A new Cummins engine was installed in 2008. Estimated hours on the engine is 500. In 2013, a new cutterhead was installed. Pontoons are rusted and will need to be replaced. Location: State of Texas, USA Principal Dimensions and Characteristics Length Over All:…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 8010-HP
Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…
-
SOLD: 12-inch Horizontal Cutter Dredger, IMS 5012
Built in 2018 and has only 3287 hours. Dredging depth max is 22-ft. Pipe diameter is 12-in. The dredge is self-propelled with IMS patented Starwheel Drive. Cutterhead length is 108-in and diameter is 22-in. Total solid capacity is 260 yds3/hr. Nominal pump capacity is 1,033 yds3/hr. It is one truck transportable (fully assembled). Dry weight…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
-
SOLD: 12-inch Cutter Suction Dredge (CSD)
This 40 x 22 foot Cutter Suction Dredger has a dredging depth of 30-feet with a 12-inch suction diameter and 10-inch discharge diameter. The dredge pump was made by Georgia Iron Works. The cutter power is 60-63hp. SOLD Location: Florida General Built Year/Place: 1981 Principal Dimensions and Characteristics Length: 12.19 m 40-feet Length with Ladder:…
