-
2,640 hp Deep Sea Towing Tug
- 445,000 EUR
- 120841-VO
This Tug was built in 1977 in the UK and is Classification Society is I.N.S.B A1+2+3 and the next Special Survey is in 02/2012. This vessel is in very good condition. Location for inspection/delivery: W. AFRICA / W. EUROPE (September) Principal Dimensions and Characteristics Year Built: Classification Society: Length…
-
10-inch Horizontal Cutter Dredge IMS 7012 HP “Versi-Dredge”
- 295,000 EUR
- 120847-DH
The machine was delivered to the seller new in 2007 and has 1,860 hours on the clock. It is in good working order. Located in the West of Ireland Principal Dimensions and Characteristics Length Over All: 15.7 m 51.5 feet Width: 3.6 m 11.8 feet Height: 3.2 m 10.5 feet …
-
4,900,000 Liter Coastal Tanker
- 925,000 EUR
- 120836-BC
This Tanker was built in 1988 in Holland and is Classification Society is LR (Lloyd’s Register) A.1. Located in The Netherlands Price for Tanker: EURO € 925,000 Principal Dimensions and Characteristics Year Built: Classification Society: LR (Lloyd’s Register) A.1 Length Over All: 110 m 361 feet Beam: 11.3 m…
-
225 hp Road Transportable Multi Purpose Work Boat
- 306,000 EUR
- 120844-VW
This Multi Purpose Work Boat is a new build and it Class will be Local Ship Inspectorate Class (registered as small work boat). The vessel is road transportable, there is no generator all the equipment is run on the main engine. The vessel is powerful and has an extreme short turning point. It could be…
-
3,200-tonne Revolving Floating Crane
- 74,500,000 USD
- 120832-BL
This 3,200-tonne Revolving Floating Crane was built in China in 2011, it is ready for inspection and delivery. Located in China Principal Dimensions and Characteristics Year Built: 2011 Length Over All: 148.40 m 487 feet Length Between Perpendiculars: 145.50 m 477 feet Beam: 44.60 m 146 feet Depth: 12.00…
-
660 hp Multi Purpose Survey Research Standby Vessel
- 120,000 GBP
- 120625-VW
This Vessel was built to LLOYD’s rules in 1968 in the UK with major conversions in 1988 and 2009 and its Classification Society/Notation is Class DTp VIII (MCA). The autopilot has been upgraded to a 921G with XTE resolution of 1.85m, i.e. autopilot. The unit has been set up for ‘plug & play’ input of…
-
Triple Drum Skagit Winch Model B-20
- 3,500 USD
- 120424-SE
This Winch was built in the late 1940’s and has no power currently. It takes 1″ wire cable and has never been used. It needs refurbishing. Location: State of California, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or…
-
Used Pipeline Pontoons for 16-inch Dredge Pipe
- 2,970 USD
- 508PF-1
File 508PF-1Used Pipeline Pontoons for 16-inch pipe47 Available, Some Long, Some Short Long pontoons 20-feet long x 41-inches diameter.Short used pontoons 16-foot 4-inches long x 44-inches diameter.Length and width dimensions are approximate and may vary slightly. All in good Condition. Located in New York, USA Available: 47 units Price: USD $ 2,970/ea All details on…
-
6,000 hp Ocean Tug
- 1,380,000 USD
- 110628-VW
This Tug was built in 1976 in Brememhaven, Germany and its Classification Society is BV (Bureau Veritas). The Class is presently suspended because the last Special Survey has not been done in about one year, but it can be reinstated by the buyer after passing the Special Survey at the buyers cost. Located in the…
-
38.6 m (126-feet) Self-Propelled Deck Barge (LCT)
- 561,000 USD
- 120112-BC
This 38.6 m (126-feet) Self-Propelled Deck Barge (LCT) was built in December, 1987 in Korea. It’s Classification Society is KST (Korean Coastal). Bilge pump and Oil/Water separator fitted. Deck plate was renewed in 2002. Flag: Korea Located in Korea Principal Dimensions and Characteristics Length Over All: 38.06 m 126 feet Beam: 8.5 m…
-
25 foot Aluminum Work Barge
- 18,000 USD
- 110963-BW
This 25 foot Aluminum Work Barge is ready for inspection and delivery. Located in The State of Florida, USA Price for Barge: USD $ 18,000 Principal Dimensions and Characteristics Length Over All: 7.62 m 25 feet Width: 3.05 m 10 feet Draft (Fully Loaded/Shallow): 406.4 / 482.6 mm 16 / 19 inches…
-
(2) MTU 12v396 TE74L Engines For Sale
- 189,000 USD
- 90125-CD
Both MTU 12v396 TE74L Engines were fitted with an RO-82 control system. (The control system can be easily changed as required to suit installation). The engines were removed from a high speed passenger ferry. They can be supplied with all engine room and bridge control and monitoring panels. MTU 12v396 TE74L Engine: Serial #5582647, on…
-
Dredge Cutter Head w/ 71-inch (1,803 mm) ID Black Ring
- 17,000 USD
- 509CH-1
Cutter head includes 8 complete extra sets of replaceable cutter edges. The cutter head edges have casting #A6337 and #A6338. New York, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied.…
-
12,000 hp Anchor Handling Tug (AHTS)
- 28,285,000 USD
- 111240-VA
This Tug was built in 2011 in China and is Class Notation is * CSA Offshore Tug/Supply Ship, Fire Fighting Ship1, Ice Class B, * CSM, DP1. Located in China Principal Dimensions and Characteristics Length Over All: 77 m 253 feet Molded Beam: 18 m 59 feet Molded Depth: 7.5 m…
-
26 inch IHC Cutter Suction Dredger
- 3,900,000 USD
- 80707 DH
This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. Its Classification Society is Bureau Veritas, the vessel had a General condition Survey of Non-Classed Vessel (For Navigation License Purpose) on April 16, 2009. This vessel is available for inspection and delivery.…
-
13 m3 Grab Dredger
- 5,026,000 USD
- 110327-DM
This Dredger was built in Japan in 1994. Its Classification Society is ZC and its Class Notation is Navigation area: Coastal/A1+A2. Located in China Principal Dimensions and Characteristics Length Over All: 45.00 m 148 feet Beam: 19.00 m 62 feet Depth: 3.50 m 11 feet Draft (Light): 1.947 m 6 feet…
-
2 m (6.5-foot) Belt Press
- 125,000 USD
- 110935-SE
This 1997 Parkson 2 meter belt press was Refurbished Like New In 2002, and has very low hours since then. It currently has new belts installed. It is situated on a 53′ semi-trailer. The press is set up at a wastewater facility in GA and can be demonstrated. Located in The State of Georgia, USA…
-
10-inch IMS 4000 Horizontal Dredge
- 67,000 MVR
- 120122-DH
This 10-inch IMS 4000 Horizontal Dredge was built in 1986. It has 4 24″ x 36″ x 96″ side mount pontoons for stability and the main pontoons have rectangular frame work for skid purposes. It has a Cummins 3.9L 116 hp engine and the dredge is propelled with a spool winch. Located in The State…