-
Not Available: 18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…
-
Not Available: 16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
Not Available: 750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: Northwest Russia General Year Built / Where Built: 1975 / Germany …
-
Not Available: 4,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 2007 in China, this dredger has been working in Western India since 2007 with the same owner. The dredger has 22 section bottom dump Hopper with a hold capacity of 4500 m3 and a telescopic hydraulically operated weir level overflow system. The vessel has accommodations for 29 persons. Location: India …
-
Not Available: 40 m x 24 m, 560-tonne payload Jack Up Barge
Built in 2018, the spuds are 30 m (98-feet) and are operated with both a winch and jacking cylinders. It has accommodations for 2 persons. Location: Korea Dimensions and Characteristics Year Built: 2018 Length: 40 m 131-feet Beam: 24 m 78.7-feet Depth: 3.2 m 10.5-feet Draft: 2.5 m 8.2-feet …
-
Not Available: 2,500 m3 Self-Propelled Hopper Barge
This listing is for a 2,500 m3 capacity Split Hopper Barge with twin fixed pitch propellers. This vessel was designed for a trailing suction hopper dredger. But the suction system is not installed. It is operated as a dumping door barge. There are 16 bottom doors which are operated by two electric controllers near front…
-
Not Available: 300 mm (12-inch) Submersible Pump, Damen DOP 3025
This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…
-
Not Available: 15 m3 Grab Dredger
770 GT Grab Dredger built in 1979 in Japan. It has a length of 49.94 m, breadth of 19.0m and depth of 3.5m. The spud is 38m. The SKK-16016 GDT-B crane has a24m boom and can dredge to a depth of 50m. Hoist speed is 65m/min. The bucket is 15m3 x 45 Ton (Light) and…
-
Not Available: 8 m3 Grab Bucket Dredger
646 Gross Ton dredger was built in 1979 in Japan. The crane is a SKK 808GDT-A with a dredging depth of 48m. Bucket size is light : 8m3 / Heavy : 5m3 and Rock breaking hammer of 25 Ton. Main engine is a MITSUBISHI S12A-MPTK with 910 HP x 1,900rpm. Location: South Korea General Year…
-
Not Available: 800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985 / Japan Dimensions and Characteristics…
-
Not Available: 8 m3 Clamshell Crane Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
Not Available: 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
Not Available: 12-inch Submersible Pump with Agitators Dragflow HY 300B
Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6…
-
Not Available: 650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA General Built: 1953…
-
Not Available: 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
