-
Sold – 12″ SDR 17 Poly Pipe
Pipe Info 12″ SDR 17 polypipe for sale. This pipe was only used for water irrigation. In great condition and is banded for transport. Material: High Density Polyethylene (HDPE) Diameter: 12″ SDR: 17 Quantity Available: 17,300′ 50′ Sticks Price: $10.00/ft Location: Montana Our HDPE…
-
SOLD: 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)
Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…
-
SOLD: 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump
Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…
-
Sold – 200KW Semi Trailer Mounted Genset
Pipe Info 200kW Semi Trailer Mounted Genset for sale. Everything works and it runs good Trailer has clean title Price: $16,000 Our support equipment inventory changes weekly. If you don’t see what you’re looking for, please call Justin at +1 (281) 248-8158 or email us.
-
Sold – Kohler 66KW Open Skid Genset with Trailer
Pipe Info Kohler 66KW Open Skid Genset with trailer. Engine hours: 3,662.5 No known issues. Runs and operates as it should New dual axle trailer Price: $6,500 Our support equipment inventory changes weekly. If you don’t see what you’re looking for, please call Justin at +1 (281) 248-8158 or email us.
-
Sold – EPIC Plus Severe Duty Motor with Berkeley Pump
Pump Info Worldwide Electric Corp – Premium Efficiency EPIC Plus Severe Duty Motor with Berkeley Pump. Motor Characteristics: Model: EP50-18-326T Horsepower (HP): 50 TEFC (Totally Enclosed Fan Cooled) IP: 55 Amps: 116.6/58.3 134/67 Voltage: 230/460V Frequency: 60 Hz RPM: 1780 Phase: 3 Serial Number: 0716336026 Pump Characteristics: Berkeley Pump Model: B6JRM (B6J-CW) H 870 B.M.…
-
Sold – 8,000 Gallon Fruge Fuel Tanks
8,000 Gallon Fruge Fuel Tanks for sale (4 available). Located in Texas. They measure 4 ft. x 6 ft. x 46 ft. Each tank will hold 8000 gallons single wall ¼ thick steel All 4 tanks have hatches and vents Price: $5,500/each Our inventory changes weekly. If you don’t see what you’re looking for, please…
-
Not Available: 16-inch SDR 17 HDPE Pipe
Quantity Available: 17,050-feet of 16-inch SDR 17 Pipe. New/unused surplus. Location: State of Texas, USA Principal Dimensions and Characteristics Material: High Density Polyethylene (Black) Pipe OD (Nominal): 406 mm 16 inches Pipe ID (Nominal): 356 mm 14.005 inches Wall Thickness (Nominal): 24 mm 0.941 inches Weight Per Foot: 19.55 lbs per footStandard Dimension Ratio: (SDR)…
-
Sold – 57 m Hold Barge, 1135 DWT
Hold barge built in 1970 with certification that expires November 2024. The barge has a length of 57.38 m, width of 8.8 m and depth of 3.52 m. Available for sale or charter Location: Netherlands General Information Built: 1970 Certification: Expires November 2024 Dimensions and Characteristics Length Over All: 57.38 m 188.3-ft…
-
SOLD: 4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
Sold: Excavator Pump Attachment 10-inch Eddy Pumps
Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit…
-
Not available – Self-Propelled Multipurpose Deck Barge with Dynamic Positioning
This self-propelled multipurpose deck barge was built in 1997. It has a Class Society nad Notation of Lloyds Register Sea Going. The barge has a Kongsberg KPOS11 DP system and 2 Azimuth Thrusters. Total main power is 1469 kW (1970 hp). The barge deck load is 10T/m2. It is next due for DD and SS…
-
SOLD: 150-tonne Self-Propelled Revolving Crane Barge
The floating crane can lift loads up to 150 mt, transport them on water and precisely position them. The crane is more flexible than mobile or port cranes in the handling of heavy and/or oversized cargo. Due to the floating cranes, waterside operations do not stain the quay. On the cranes’ cargo, loads can be stowed and transported over longer distances before safely being offloaded…
-
Sold – 200 mm (8-inch) Electric Powered Cutter Suction Dredge
Dredge Info This dredge was built in 1990. The dredge is fully electrical dredge and is in very good condition and very easy to operate. The price includes 250 m cable 4 x 180 and 250 m metal hose and all necessary needs to work. The dredge can be plugged into a 400 kw-380 V…
-
Sold – 3300 PSI 25 GPM Hydraulic Power Unit (HPU)
This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…
-
Not Available: 10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
-
SOLD: Crisafulli SD110
2010 Crisafulli SD110 w/full cab, Yamaha 115 4 stroke engine and trailer. Also includes trailer full of pipe – approx. 500-ft. The dredger is a lightweight (9,000 pounds), small (25 x 8.5 foot) self-propelled pontoon hull. Cutter head is 102 inches, dredging depth max in 12-ft. Capacity of sludge processing is 85 yd3/hr. Discharge diameter…
-
SOLD: 6-inch Dredge Pump, hydraulic driven.
Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…
